Filter
Top Products
Basic Operations
7
EN
Basic Operations
Basic Operations
Listening to the Music
5
1
3
g
SPEAKERS
ON
OFF
BASS
•
–
10
+
10
TREBLETONE
•
–
10
+
10
BALANCE
LOUDNESS
ØON øOFF
•
LEFT RIGHT
VOLUME
010
INPUT SELECTOR
CD
TUNER
PHONO
AUX
TAPE2/MD
TAPE1/DAT
PHONES
EON LINK
S
T
A
N
D
B
Y
SOURCE DIRECT TAPE MONITOR
z If 1/u is pressed down
You can turn the amplifier
on and off by pressing 1/u
on the remote.
z To listen through the
headphones
Connect the headphones to
PHONES and set
SPEAKERS to OFF.
z To listen directly to the
input signal
Press SOURCE DIRECT so
that the indicator lights up.
Since the circuits of TONE
controls, BALANCE control
and LOUDNESS button are
bypassed, you cannot adjust
bass, treble, the balance,
reinforce the bass and treble
while listening to a source
directly.
Note
Avoid high speaker output at
which the sound is distorted.
High-frequency distortion may
damage the tweeters.
1
Press 1/u to turn on the amplifier and turn VOLUME fully
counterclockwise to prevent damaging the speakers with
excessive output.
2
Turn on the programme source you want to listen to.
3
Set INPUT SELECTOR to the respective programme source.
Source connected to AUX
AUX
Record
Radio broadcast
Compact disc
To listen to a Turn INPUT SELECTOR for
PHONO
TUNER
CD
Source connected to:
—TAPE1/DAT
—TAPE2/MD
Press or turnTo
BASS
TREBLE
BALANCE
LOUDNESS
Adjust the bass
Adjust the treble
Adjust the balance
Reinforce the bass and treble at low
listening level
TAPE1/DAT
TAPE2/MD
4
Start the programme source.
5
Adjust the volume by turning VOLUME.