Filter
Top Products
20
Connections
Front Speakers Wall Mount Installation
3. Use the wall mount hole (bracket) to install
the speaker on the wall.
3
Installing the Wall Mount
<Front>
1. Insert the wall mount so that it fits into the
rear hole of the speaker as in the figure.
2. Turn the wall mount counter clockwise to
fix it. (This is in the reverse direction of the
cradle stand installation.)
2
1
M
Make sure the speaker is hung properly to avoid accidents or injury. `
HT-Z420 - Front Speakers
Connecting the Front, Centre,Rear and Subwoofer Speakers
Press down the terminal tab on the back of the speaker. 1.
Insert the black wire into the black terminal (–) and the red 2.
wire into the red terminal(+), and then release the tab.
Connect the other end of the speaker cable to the 3.
connecting jacks on the back of the Home Theatre and
Wireless Receiving Module.
Make sure the colours of the connecting plugs match the connecting jacks.•