Filter
Top Products
30
GB
General
Power requirements 230 V AC, 50/60 Hz
Power consumption 110 W
Power consumption (during standby mode)
0.5 W
Dimensions (w/h/d) 430 × 63 × 289 mm
including projecting parts
and controls
Mass (Approx.) 4.6 kg
Speaker Section
SS-MSP2 Front and surround speakers
SS-CNP2 Center speaker
Speaker system Full range, magnetically
shielded
Speaker units 70 mm
×
100 mm cone
type
Enclosure type Bass reflex
Rated impedance 8 ohms
Power handling capacity
(Maximum input power)
100 watts
Sensitivity level 85 dB (1 W, 1m)
Frequency range 160 Hz – 20, 000 Hz
Dimensions (w/h/d)
Approx.
(MSP2) 81 × 141 × 121 mm
(CNP2) 230 × 81 × 121 mm
including front grille
Mass Approx.
(MSP2) 0.8
kg
(CNP2) 1.0
kg
SA-WMSP3 subwoofer
Speaker system
Active subwoofer,
magnetically shielded
Speaker unit Woofer: 20 cm cone type
Enclosure type Acoustically Loaded Bass
Reflex
Continuous RMS power output
(6 ohms, 20 – 250 Hz) 100 W
Reproduction frequency range
28 Hz – 200 Hz
High frequency cut-off frequency
150 Hz
Input LINE IN (input pin jack)
Power requirements 230 V AC, 50/60 Hz
Power consumption 100 W
Dimensions (w/h/d) 272 × 326 × 405 mm
including front panel
Mass (Approx.) 10 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-U25 (1)
R6 (size-AA) batteries (2)
Speakers
• Front speakers (2)
• Center speaker (1)
• Surround speakers (2)
• Sub woofer (1)
Speaker cords (long) (2)
Speaker cords (short) (3)
Speaker foot pads (24)
Coaxial digital cord (1)
Monaural audio cord (1)
Design and specifications are subject to change
without notice.
Specifications (continued)