Filter
Top Products
24
GB
5: Connecting the
antennas
Connect the supplied AM loop antenna
(aerial) and FM wire antenna (aerial).
Before connecting the antennas, be sure to
disconnect the AC power cord (mains lead).
Notes
• To prevent noise pickup, keep the AM loop
antenna (aerial) away from the receiver and other
components.
• Be sure to fully extend the FM wire antenna
(aerial).
• After connecting the FM wire antenna (aerial),
keep it as horizontal as possible.
6: Preparing the receiver
Connect the AC power cord (mains lead) to a
wall outlet.
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their initial settings.
Be sure to use the buttons on the receiver for
this operation.
1 Press ?/1 to turn on the
receiver.
2 Hold down ?/1 for a few
seconds until “CLEARED”
appears.
All the settings you have changed or
adjusted are reset to the initial settings.
AM
AUTO
CAL MIC
HDMI
EZW-T100
DMPORT
DC5V 0.7A MAX
DVD IN BD IN SAT/CATV IN TV OUT
ARC
AUDIO IN
VIDEO
L
R
SA-CD
/
CD
COAX IN
SAT/CATV
TV
OPT IN OPT IN
AUDIO IN
TV
DIGITAL
ANTENNA
FM wire antenna (aerial) (supplied)
AM loop antenna (aerial)
(supplied)
Connecting the AC power cord
(mains lead)
Performing initial setup
operations
FRONT R
SPEAKERS
FRONT L SUR R SUR L CENTER
SUBWOOFER
AC power cord (mains lead)
To the wall outlet
MASTER VOLUME
POWER /
ACTIVE STANDBY
?/1