Filter
Top Products
35
US
Tuner Operations
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation, be
sure you have connected the FM and AM
antennas to the receiver (page 24).
1 Press TUNER repeatedly to
select the FM or AM band.
You can also press INPUT SELECTOR
+/– on the receiver.
2 Press and hold TUNING +/–
until the auto scanning starts.
Press TUNING + to scan from low to
high frequency; press TUNING – to scan
from high to low frequency.
The receiver stops scanning whenever a
station is received. To stop the Auto
Tuning manually, press TUNING +/–.
If an FM program is noisy
If an FM program is noisy, you can select
monaural reception. There will be no stereo
effect, but reception will improve.
1 Press MENU/HOME.
2 Press V/v repeatedly until “FM
MODE” appears, then press
or b.
3 Press V/v repeatedly until
“MONO” appears, then press
.
• STEREO: Stereo reception.
• MONO: Monaural reception.
The initial setting is “STEREO”.
4 Press MENU/HOME.
Tip
To improve reception, reorient the supplied
antennas.
Tuner Operations
.
mM
>
X
x
BD DVD
SAT/
CATV
VIDEO
SA-CD/
CD
DMPORT
TUNER
O
TV
MENU
TUNING
+/–
TUNER
MENU/
HOME
,
V/v/B/b
ENTER
D. TUNING
Numeric
buttons
SHIFT
Tuning into a station
automatically (Auto Tuning)