Filter
Top Products
Amplifier Operations
12
GB
Using the remote
The remote lets you operate the amplifier and the Sony
components that are connected to it.
1 Press one of the SYSTEM CONTROL/
FUNCTION buttons to select the component you
want to use.
The amplifier and the selected component turn
on.
The SYSTEM CONTROL/FUNCTION buttons on
the remote are factory-set as follows:
If you want to change the factory setting of a button
See “Changing the Factory Setting of a FUNCTION
Button” on page 13.
If the component does not turn on
Press the power switch on the component.
2 Start playing.
Refer to “Remote Button Descriptions” on page 21
for details.
?/1
AV ?/1
SYSTEM
CONTROL/
FUNCTION
To play
TV programmes
VHS Tapes
(VTR-3 mode)
DVD player
(for 2-ch playback)
DVD player/
AC-3 decoder
Press
TV
VIDEO
DVD
5.1 CH
To turn off the components
Press AV ?/1 and ?/1 simultaneously. This will also turn
off the Sony video/audio components at the same time. If
the components do not turn off, press the power switch on
the components.
If you use a Sony TV
• The TV turns on automatically and switches to the
appropriate video input when you press VIDEO. If
the TV does not switch to the appropriate input
automatically, press TV/VIDEO on the remote.
• When you use the TV only, turn on the TV using the
TV’s remote.