Sony HT-DDW760 Home Theater System User Manual


 
Getting Started
masterpage:Right
lename[E:\SEM_Janet\DDW760_3rdrevision\J9040000_4252086131DDW760GB\4252086131\
G
B03CON_HT-DDW760-U.fm]
5
GB
model name1[HT-DDW760]
[4-252-086-13(1)]
Steps 1a through 1c beginning on page 7 describe how to hook up your components to this receiver.
Before you begin, refer to “Connectable components” below for the pages which describe how to
connect each component.
After hooking up all your components, proceed to “2: Connecting the antennas” (page 13).
Connectable components
a)
Model with a DIGITAL OPTICAL OUTPUT or DIGITAL COAXIAL OUTPUT jack, etc.
b)
(Models of area code CEL, CEK only) Model with a MULTI CH OUTPUT jacks, etc. This connection is used to
output the audio decoded by the component’s internal multi channel decoder through this receiver.
c)
Model equipped only with AUDIO OUT L/R jacks, etc.
Getting Started
1: Check how to hookup your components
Component to be connected Page
DVD player
With digital audio output
a)
7–8
With multi channel audio output
b)
9–10
With analog audio output only
c)
7–8
TV monitor
With composite video input only 8, 10 or 12
Satellite tuner
With digital audio output
a)
7–8
With analog audio output only
c)
7–8
CD player
With analog audio output only
c)
11
MD/Tape deck
With analog audio output only
c)
11
Multi channel decoder (Models of area code CEL, CEK only) 9
VCR 12
continued
GB01COV_HT-DDW760-U.book Page 5 Tuesday, April 20, 2004 3:10 PM