Filter
Top Products
23
US
BLUETOOTH Function
You can adjust the volume of the
system via a BLUETOOTH device
supporting the volume command of
AVRCP (Audio Video Remote Control
Profile). You can set how this system
operates when the volume is adjusted
via the BLUETOOTH device with
“BT.VOL” on the AMP menu. For details,
refer to the operating instructions
supplied with the device.
You may not be able to adjust the
volume, depending on the device.
If the source device has a bass boost
function or equalizer function, turn
them off. If these functions are on,
sound may be distorted.
In the following cases, you will have to
make the BLUETOOTH connection
again.
The power of the system is not on.
The power of the BLUETOOTH device
is not on, or the BLUETOOTH function
is off.
The BLUETOOTH connection is not
established.
If more than one devices paired with the
system are playing, sound will be heard
from just one of those devices.
Terminate the BLUETOOTH
connection by any of the operations
listed below.
Operate the BLUETOOTH device to
terminate the connection. For
details, refer to the operating
instructions supplied with the device.
Turn off the BLUETOOTH device.
Turn off the system.
Tips
Notes
Finishing the BLUETOOTH
connection