Sony HT-DDW685 Home Theater System User Manual


 
61
GB
Additional Information
2)
Reference power output for front, center, surround
speakers and sub woofer. Depending on the sound
field settings and the source, there may be no
sound output.
3)
Measured under the following conditions:
Inputs
Analog Sensitivity: 800 mV/
50 kohms
Digital (Coaxial) Impedance: 75 ohms
Tone
Gain levels ±6 dB, 1 dB step
Reproduction frequency range:
28 – 20,000 Hz
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Models of area code U, CA
With 10-kHz tuning scale:
530 – 1,710 kHz
4)
With 9-kHz tuning scale:
531 – 1,710 kHz
4)
Models of area code CEL, CEK, SP
With 9-kHz tuning scale:
531 – 1,602 kHz
Models of area code E51:
With 10-kHz tuning scale:
530 – 1,610 kHz
4)
With 9-kHz tuning scale:
531 – 1,602 kHz
4)
Models of area code MX, AR
With 10-kHz tuning scale:
530 – 1,610 kHz
Antenna Loop antenna
Intermediate frequency
450 kHz
4)
You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. While holding down MOVIE, press
?/1. All preset stations will be erased when you
change the tuning scale. To reset the scale to 10
kHz (or 9 kHz), repeat the procedure.
General
Power requirements
Power consumption
Power consumption (during standby mode)
0.3 W
Dimensions (w/h/d) (Approx.)
429 × 145 × 308 mm
(16 7/8 × 5 6/8 × 12 1/8
inches)
including projecting parts
and controls
Mass (Approx.) 7.4 kg (16 lb 9 oz)
Area code Power requirements
AR 220 V AC, 50 Hz
Area code Power requirements
U, CA 120 V AC, 60 Hz
SP 230 – 240 V AC, 50/60 Hz
CEL, CEK 230 V AC, 50/60 Hz
MX 127 V AC, 60 Hz
E51 120/220/240 V AC,
50/60 Hz
AR 220 – 230 V AC, 50/60 Hz
Area code Power consumption
U 210 W
CA 290 VA
SP, MX, E51, AR 190 W
CEL, CEK 220 W
continued