Filter
Top Products
masterpage:Left
lename[E:\SEM_Janet\Data_HT-
S
L800_REV\J9040472_4254753121SL800GB\4254753121\GB09ADD_HT-SL800-CEL.fm]
38
GB
model name1[HT-SL800]
[4-254-753-12(1)]
If you are unable to remedy the
problem using the
troubleshooting guide
Clearing the receiver’s memory may remedy the
problem (page 14). However, note that all
memorized settings will be reset to their factory
settings and you will have to readjust all settings
on the receiver.
If the problem persist
Consult your nearest Sony dealer.
Reference sections for clearing
the receiver’s memory
Amplifier section
Power Output
Models of area code CEL, CEK
(6 ohms 1 kHz, THD 0.7%)
1)
FRONT
2)
: 40 W/ch
CENTER
2)
: 40 W
SURR
2)
: 40 W/ch
(6 ohms 1 kHz, THD 10%)
1)
FRONT
2)
: 60 W/ch
CENTER
2)
: 60 W
SURR
2)
: 60 W/ch
Models of area code AU
(6 ohms 120 Hz–20 kHz, THD 0.09%)
1)
FRONT
2)
: 35 W/ch
CENTER
2)
: 35 W
SURR
2)
: 35 W/ch
(6 ohms 1 kHz, THD 0.7%)
1)
FRONT
2)
: 40 W/ch
CENTER
2)
: 40 W
SURR
2)
: 40 W/ch
(6 ohms 1 kHz, THD 10%)
1)
FRONT
2)
: 60 W/ch
CENTER
2)
: 60 W
SURR
2)
: 60 W/ch
Models of area code CN
(6 ohms 1 kHz, THD 0.7%)
1)
FRONT
2)
: 40 W/ch
CENTER
2)
: 40 W
SURR
2)
: 40 W/ch
(6 ohms 1 kHz, THD 10%)
1)
FRONT
2)
: 60 W/ch
CENTER
2)
: 60 W
SURR
2)
: 60 W/ch
(6 ohms 1 kHz, THD 0.7%)
3)
FRONT
2)
: 37 W/ch
CENTER
2)
: 37 W
SURR
2)
: 37 W/ch
(6 ohms 1 kHz, THD 10%)
3)
FRONT
2)
: 55 W/ch
CENTER
2)
: 55 W
SURR
2)
: 55 W/ch
1) Measured under the following conditions:
2) Depending on the sound field settings and the
source, there may be no sound output.
To clear See
All memorized settings page 14
Customized sound fields page 28
Specifications
Area code Power requirements
CEL, CEK, CN 230 V AC, 50 Hz
AU 240 V AC, 50 Hz
GB01COV_HT-SL800-CEL.book Page 38 Friday, June 18, 2004 5:04 PM