Sony GX450 Stereo System User Manual


 
24
GB
You can sing along by connecting an optional
microphone.
1 Turn MIC LEVEL on the unit to MIN to
turn down the microphone control
level.
2 Connect an optional microphone to
MIC.
3 Start playing the music.
4 Adjust the microphone volume by
turning MIC LEVEL on the unit.
After you have finished
Turn MIC LEVEL on the unit to MIN and
disconnect the microphone from MIC.
Mixing and recording sounds
You can “mix” sounds by playing one of the
components and singing or speaking into a
microphone (not supplied).
The mixed sound can be recorded on a tape.
Use buttons on the unit for the operation.
1 Prepare the source you want to mix.
Then, load a recordable tape in deck B
and press TAPE A/B repeatedly to
select deck B.
2 Press PLAY MODE repeatedly to select
g to record on one side. Select j
(or RELAY) to record on both sides.
3 Press the function button of the source
you want to record (e.g., CD).
When you want to record from TAPE A,
press TAPE A/B repeatedly until TAPE A
is selected.
4 Press REC PAUSE/START.
Deck B stands by for recording.
“REC” flashes.
5 Press REC PAUSE/START, and then
start singing, speaking or playing the
desired source.
Recording starts.
To stop recording
Press x.
Note
Microphone does not function while the tape deck is
performing the AMS operation (page 19).
Tips
If acoustic feedback (howling) occurs, move the
microphone away from the speakers or change the
direction of the microphone.
If you want to record your voice through the
microphone only, you can do so by selecting the CD
function and not playing a disc.
When high level sound signals are input, the system
automatically adjusts the recording level to prevent
distortion of the recorded sound signal (Auto Level
Control function).
Singing along
(MHC-RG555 only)