Filter
Top Products
masterpage:Left
lename[F:\Sony SEM
H
A\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB04BSC_STR-DK5-
S
P.fm]
20
GB
model name1[STR-DK5]
[2-656-285-14(1)]
A SW: Lights up when sub woofer selection is
set to “YES” (page 13) and the audio signal is
output from the SUB WOOFER jack.
B LFE: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
C SP: Lights up when you turn on the receiver.
D ; DIGITAL: Lights up when the receiver is
decoding signals recorded in the Dolby Digital
format.
Note
When playing a Dolby Digital format disc, be
sure that you have made digital connections and
that INPUT MODE is not set to “ANALOG”
(page 27).
E ; PRO LOGIC II: “; PRO LOGIC” lights
up when the receiver applies Pro Logic
processing to 2 channel signals in order to
output the center and surround channel
signals. “; PRO LOGIC II” lights up when
the Pro Logic II Movie/Music decoder is
activated. However, these indicators do not
light up if both the center and surround
speakers are set to “NO” and you select a
sound field using the A.F.D. button.
F DTS: Lights up when DTS signals are input.
Note
When playing a DTS format disc, be sure that you
have made digital connections and that INPUT
MODE is not set to “ANALOG” (page 27).
G Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 17–19 for tuner operations.
H D.RANGE: Lights up when dynamic range
compression is activated (page 28).
I COAX: Lights up when the source signal is a
digital signal being input through the
COAXIAL terminal.
J OPT: Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal.
K SLEEP: Lights up when sleep timer is
activated.
L Playback channel indicators: The letters
(L, C, R, etc.) indicate the channels being
played back. The boxes around the letters vary
to show how the receiver downmixes the
source sound (based on the speakers settings).
L (Front Left), R (Front Right), C (Center
(monaural)), SL (Surround Left), SR
(Surround Right), S (Surround (monaural or
the surround components obtained by Pro
Logic processing))
Example:
Recording format (Front /Surround): 3/2
Output channel: When the surround speakers size
parameter is set to “NO”
Sound Field: A.F.D. AUTO
About the display
L C R
SL SSR
LFE
SP
DIGITAL
PRO LOGIC II
DTS
D.RANGE
STEREO MONO
SLEEP OPT COAX
;;
MEMORY
SW
8
qa
q
s
9q;
214356 7
L C R
SL SR
GB01COV_STR-DK5-SP.book Page 20 Monday, February 20, 2006 6:34 PM