Filter
Top Products
18
Step 4: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections, through .
* Manufactured under license from Dolby
Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
** “DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
Components to be connected Connection Your setup (example)
TV
• Surround effects: TVS DYNAMIC (page 49),
TVS WIDE (page 49)
(page 19)
Stereo amplifier (receiver)
and two speakers
• Surround effects: TVS STANDARD (page 49)
or
MD deck/DAT deck
• Surround effects: TVS STANDARD (page 49).
(page 20)
AV amplifier (receiver) having a Dolby
*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 69)
(page 21)
AV amplifier (receiver) with digital input jacks
having a Dolby Digital, DTS**, or MPEG audio
decoder and 6 speakers
• Surround effects:
–Dolby Digital (5.1ch) (page 69)
–DTS (5.1ch) (page 69)
–MPEG audio (5.1 ch) (page 69)
(page 22)
A D
A
B
C
D