Filter
Top Products
27
You can use the following power sources:
• LR6 (size AA) alkaline batteries
• Rechargeable batteries
•AC power adaptor
For the battery life, see “Specifications.”
Using the batteries
Use only the following batteries for your CD
player.
For inserting procedure, see “Playing an
audio CD or ATRAC3 plus/ATRAC3/MP3
files.”
Dry batteries (not supplied)
• LR6 (size AA) alkaline batteries
Rechargeable batteries (not supplied)
Charge the rechargeable batteries before
using them for the first time.
• NH-WM2AA (NH-WMAA × 2)
To charge the rechargeable
batteries (not supplied)
1 Connect the AC power adaptor to the DC
IN 4.5 V jack of your CD player and an
AC outlet.
2 Press x/CHARGE to start charging.
The CD player charges the batteries. The
indicator sections of light up in
succession and “Charging” appears in the
display. When the batteries are
completely charged, “Charging” and the
indicator get turned off.
If you press x/CHARGE after the charge
has already been completed, the
indicator flashes and “FULL” appears in
the display.
3 Disconnect the AC power adaptor.
B
Connecting to a power source
Connecting to a power source
To remove the batteries
Remove the batteries as illustrated below.
To check the remaining power of the
batteries
You can check it in the display.
Replace the batteries when “ ” flashes.
t t t t t
Lo batt*
* Beep sounds.
Notes
• The indicator sections of roughly shows
the remaining battery power. One section does
not always indicate one-fourth of the battery
power.
• Depending on operating conditions, the indicator
sections of
may increase or decrease.
Notes on using the dry batteries
• Be sure to remove the AC power adaptor.
• When the batteries are depleted, replace
both batteries with new ones.
When to replace the rechargeable
batteries
If the battery life becomes shorter by about
half, replace the batteries with new
rechargeable batteries.
(Continued)