Sony DAV-SR3 Home Theater System User Manual


 
20
GB
Notes
Make connections securely to prevent unwanted noise.
• Refer to the instructions supplied with the TV.
• The system cannot output component video signals.
• The system cannot output an audio signal to the connected TV. Only the audio signal of the TV is output from the
system speakers.
Tips
• When you want to output the TV sound or stereo sound of a 2 channel source from the 6 speakers, select any sound
field other than “AUTO FORMAT DIRECT AUTO” or “2CH STEREO” (page 46).
• If a distortion occurs during playback of the component that is connected to the VIDEO AUDIO IN jacks, connect
the component to the SAT AUDIO IN jacks.
If you connect a digital satellite receiver with an OPTICAL OUT jack
The digital satellite receiver can be connected to the SAT OPTICAL DIGITAL IN jack instead of the
SAT AUDIO IN (L/R) jacks of the system.
The system can accept both the digital and analogue signals. Digital signals have priority over analogue
signals. If the digital signal ceases, the analogue signal will be processed after 2 seconds.
If you connect a digital satellite receiver without an OPTICAL OUT jack
Connect the digital satellite receiver to the SAT AUDIO IN (L/R) jacks only of the system.
To listen to the game machine (e.g., PlayStation 2) sound by using the
system
Connect the audio output jacks of the game machine to the SAT AUDIO IN (L/R) jacks of the system
with the audio cords (not supplied).
R
AUDIO
OUT
L
R
AUDIO
OUT
L
OPTICAL
DIGITAL
OUT
INTPUT(FROM VIDEO)
EURO AV
AUDIO IN
VIDEO
SURROUND
BACK
SAT
SAT
SPEAKER
AUDIO IN
OPTICAL
DIGITAL IN
RL
RL
CENTER FRONT LFRONT R
SURR L
WOOFER
WOOFERSURR R
EURO AV OUTPUT(TO TV)
COAXIAL
AM
FM 75
OUT INOUT OUT
TV
VCR
Digital satellite receiver or
PlayStation 2 etc.