Filter
Top Products
68
GB
Setting the speakers by using
the front panel display on the
system
You can set the speakers by using the amp menu
that is displayed in the front panel display.
1 Press AMP MENU repeatedly until the
item you want to set appears in the
front panel display.
• SP. SETUP
Sets the speaker size, distance, and place.
•LEVEL
Sets the balance and level of the each
speaker, and turns on/off the test tone.
2 Press X or x to select the desired item,
then press C or c to select the desired
setting.
You can set the following items:
• SP. SETUP
• LEVEL
The amp menu is cancelled when you do
not operate the remote for several seconds.
CENTER
(centre speaker)
YES (yes)
NO (no)
SURR.
(surround speakers)
YES (yes)
NO (no)
F.D.
(front speakers
distance)
1.0 to 7.0 metres
AMP MENU
C/X/x/c/
ENTER
C.D.
(centre speaker
distance)
Up to 1.6 metres
closer to the
listening position
than the front
speakers. (Cannot
be set to less than 1
metre.)
S.D.
(surround speakers
distance)
Up to 4.6 metres
closer to the
listening position
than the front
speakers. (Cannot
be set to less than 1
metre.)
S.P.
(surround speakers
position)
BEHIND (behind)
SIDE (side)
S.H.
(surround speakers
height)
LOW (low)
HIGH (high)
T.TONE
(test tone)
ON (on)
OFF (off)
F.______I_______
(front speakers
balance)
C.LEV
(centre speaker
level)
–6 dB to +6 dB
S.L.LEV
(surround left
speaker level)
–6 dB to +6 dB
S.R.LEV
(surround right
speaker level)
–6 dB to +6 dB
S.W.LEV
(subwoofer level)
–6 dB to +6 dB
D.COMP
(dynamic
compression)
ON (on)
OFF (off)