Filter
Top Products
Sound Adjustments
51
GB
DAV-S550 4-241-065-12(1)
Using only the front
speakers and subwoofer
(2 Channel Stereo)
Press SOUND FIELD –/+ on the system
or SOUND FIELD on the remote
repeatedly until “2CH STEREO”
appears on the front panel display.
This mode outputs the sound from the front
left and right speakers and subwoofer.
Standard two channel (stereo) sources
completely bypass the sound field
processing. Multi channel surround formats
are downmixed to two channels.
This allows you to play any source using
only the front left and right speakers and
subwoofer.
SOUND
FIELD
123
456
7
>
10
10/0
89
Adjusting the level
parameters
The level menu contains parameters that let
you adjust the balance and speaker volumes
of each speaker (page 27).
1 Start playing a program source
encoded with multichannel
surround sound.
2 Press AMP MENU repeatedly.
9 LEVEL appears on the front panel
display.
3 Sit in your listening position and
select the item to be adjusted
using X/x.
4 Adjust the volume level using C/c.
The adjusted value will appear on the
front panel display. If you do not operate
the remote for a few seconds, the value
turns off and is stored in the system.
123
456
7
>
10
10/0
89
ENTER
AMP MENU
C/X/x/c