Sony SRSDZ10 Home Theater System User Manual


 
Additional Information
79
GB
Amplifier section
Stereo mode (rated) 50 W + 50 W (3 ohms at 1
kHz, 1 % THD)
Surround mode (reference) RMS output power, 10 %
THD
Front: 67 W + 67 W
(with SS-TS60)
Center*: 67 W
(with SS-CT54)
Surround*:
67
W +
67
W
(with SS-TS61)
Subwoofer*: 65 W
(with SS-WS34)
* Depending on the sound field settings and the source,
there may be no sound output.
Inputs
TV/VCR (AUDIO IN) Sensitivity: 250/450 mV
Impedance: 50 kilohms
DVD system
Laser Semiconductor laser
(DVD: λ = 650 nm)
(CD: λ = 790 nm)
Emission duration:
continuous
Signal format system PAL/NTSC
Frequency response (at 2 CH STEREO mode)
DVD (PCM): 2 Hz to 22
kHz (±1.0 dB)
CD: 2 Hz to 20 kHz (±1.0
dB)
Harmonic distortion Less than 0.03 %
Tuner section
System PLL quartz-locked digital
synthesizer system
FM tuner section
Tuning range 87.5 – 108.0 MHz (50 kHz
step)
Antenna (aerial) FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency 10.7 MHz
AM tuner section
Tuning range 531 – 1,602 kHz (with the
interval set at 9 kHz)
Antenna (aerial) AM loop antenna (aerial)
Intermediate frequency 450 kHz
Video section
Outputs VIDEO: 1 Vp-p 75 ohms
S VIDEO:
Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
PB/CB, PR/CR: 0.7 Vp-p
75 ohms
Speakers
Front
Speaker system Bass reflex, magnetically
shielded
Speaker unit 50 mm dia. cone type
Rated impedance 3.0 ohms
Dimensions (approx.) 68 × 126 × 55 mm (w/h/d)
Mass (approx.) 0.40 kg
Center
Speaker system Bass reflex, magnetically
shielded
Speaker unit 50 mm dia. cone type
Rated impedance 3.0 ohms
Dimensions (approx.) 125 × 69 × 51 mm (w/h/d)
Mass (approx.) 0.30 kg
Surround
Speaker system Bass reflex
Speaker unit 50 mm dia. cone type
Rated impedance 3.0 ohms
Dimensions (approx.) 68 × 126 × 55 mm (w/h/d)
Mass (approx.) 0.30 kg
Subwoofer
Speaker system Bass reflex, magnetically
shielded
Speaker unit 150 mm dia. cone type
Rated impedance 3.0 ohms
Dimensions (approx.) 169 × 300 × 335 mm
(w/h/d)
Mass (approx.) 3.7 kg
General
Power requirements 220 – 240 V AC, 50/60 Hz
Power consumption On: 95 W
Standby: 0.3 W (at the
Power Saving mode)
Dimensions (approx.) 430 × 70 × 295 mm (w/h/d)
incl. projecting parts
Mass (approx.) 3.6 kg
Supplied accessories See page 12.
Design and specifications are subject to change
without notice.
Specifications