Filter
Top Products
CMT-HX3R.GB.3-095-515-11(1)
16
GB
1
Connect a recordable USB
device to the (USB) port
.
2
Select the CD function, then
load the disc you want to
record.
3
Select the track or MP3 le you
want to record, then start play.
4
Press CD-USB SYNC/REC1
on
the unit while the selected track
or MP3 le is being played back.
“REC” ashes, and the display cycles
through “REC 1,” “xxxMB Free”
(remaining space on the USB device)
and “Push ENTER.”
e USB device stands by for
recording and the CD player pauses
for play.
5
Press ENTER
.
Recording starts. When the recording
is completed, the CD player continues
to play.
To stop recording
Press
.
To remove the USB device
1
Select the USB function.
Press USB
.
2
Hold down
on the unit in stop
mode until “No Device“ appears.
3
Remove the USB device.
To erase MP3 les or folders from the
USB device
You can erase MP3 les or folders from
the USB device.
1
Connect a recordable USB device to
the (USB) port
.
2
Select the USB function.
Press USB
.
3
Press /
or +/
repeatedly to select the MP3 le or
folder you want to erase.
4
Press ERASE
on the unit.
“TRK Erase” or “FLDR Erase,” and
“Push ENTER” appear alternately in
the display.
To cancel the erase operation, press
.
5
Press ENTER
.
e selected MP3 le or folder is
erased.
Folder and le generation rules
When rst recording to an USB device,
a “MUSIC” folder is created directly
below the “ROOT.” Folders and les are
generated within this “MUSIC” folder
as follows according to the recording
method.
Synchro Recording
1)
Recording
source
Folder name File name
MP3 Same as the recording source
2)
CD-DA “FLDR001”
3)
“TRACK001”
4)
REC1 recording
Recording
source
Folder name File name
MP3
“REC1-001”
5)
Same as the
recording
source
2)
CD-DA “TRACK001”
4)
1)
In Program Play mode, the folder name is
“FLDRxxx,” and the le name depends on the
recording source (CD-DA disc or MP3 disc).
2)
Up to 32 characters of the name are assigned.
3)
Folder numbers are assigned serially
thereaer up to the maximum 999 (including
the “ROOT” and “MUSIC” folders).
4)
File numbers are assigned serially thereaer.
5)
A new le is recorded in the “REC1-
001” folder each time REC1 recording is
performed.