Filter
Top Products
Note on Repeat play
If you select “REP” in the Normal Play mode, the system repeats
playback of all audio files stored in the USB device.
If you select “REP” in the Folder Play mode, the system repeats
playback of all audio files in the selected folder.
Notes
When the USB cable connection is necessary, connect the USB cable
supplied with the USB device to be connected. See the operation
manual supplied with the USB device to be connected for details on
the operation method.
It may take about 10 seconds before “Reading” appears depending
on the type of USB device connected.
Do not connect the system and the USB device through a USB hub.
When the USB device is inserted, the system reads all the files on
the USB device. If there are many folders or files on the USB device,
it may take a long time to finish reading the USB device.
With some connected USB devices, after an operation is performed,
there may be a delay before it is performed by this system.
Compatibility with all encoding/writing software cannot be
guaranteed. If audio files on the USB device were originally encoded
with incompatible software, those files may produce noise or
interrupted sound, or may not be played back at all.
This system cannot play audio files on the USB device in the
following cases;
when the total number of audio files in a folder exceeds 100.
when the total number of audio files on a USB device exceeds
10000.
when the total number of folders on a USB device exceeds 100
(including the “ROOT” folder and empty folders).
These numbers may vary depending on the file and folder structure.
Do not save other types of files or unnecessary folders on the USB
device that has audio files.
This system displays the track number as “---” when the number of
audio files on a USB device exceeds 1000.
The system can play back to a depth of 8 folders only.
This system does not necessarily support all the functions provided
in a connected USB device.
Folders that have no audio files are skipped.
The audio formats that you can listen to with this system are as
follows:
MP3: file extension “.mp3”
WMA: file extension “.wma”
AAC: file extension “.m4a”
Note that even when file name has the correct file extension,
if the actual file differs, the system may produce noise or may
malfunction.
To use the system as a battery charger
You can use the system as a battery charger for the USB
devices that have a rechargeable function when the
system is on.
The charging begins when the USB device is connected
to the (USB) port. The charge status appears on the
USB device display. For details, see the user’s guide of
your USB device.
Using optional audio components
1 Prepare the sound source.
Connect additional audio component to the AUDIO
IN 1 or AUDIO IN 2 jack on the unit using an audio
analog cord (not supplied).
2 Turn down the volume.
Press VOLUME .
3 Select the AUDIO IN 1 or AUDIO IN 2 function.
Press FUNCTION +/ repeatedly.
4 Start playback.
Start playback of the connected component and adjust
the volume.
Note
The system may enter the Standby mode automatically if the volume
level of the connected component is too low. Adjust the component’s
volume accordingly. See “To turn off the Automatic Standby
function.”
Adjusting the sound
To Press
Adjust the volume
VOLUME +/.
Set the sound
effect
EQ repeatedly to select “BASS” or
“TREBLE,” and then press / to
adjust the level.
Changing the display
To Press
Change
information on
the display*
1
DISPLAY repeatedly when the
system is on.
Change Display
mode (see below.)
DISPLAY repeatedly when the
system is off.*
2
*
1
For example, you can view the CD/MP3 disc information or the
USB device information, such as;
track or file number
track or file name (“ ”)
artist name (“ ”)
album or folder name (“ ”)
total playing time and total number of tracks on the CD-DA disc
(only when the Normal Play mode is selected and the player is
stopped).
total number of folders (albums) on the MP3 disc (only when the
Normal Play mode is selected and the player is stopped).
volume label if it exists on the MP3 disc (only when the Normal
Play mode is selected and the player is stopped).
*
2
The STANDBY indicator on the unit lights up when the system is
off.
The system offers the following display modes.
Display mode When the system is off *
1
,
Power Saving
mode*
2
The display is turned off to save
power. The timer and clock
continue to operate.
Clock*
3
The clock is displayed.
*
1
The STANDBY indicator on the unit lights up when the system is
off.
*
2
You cannot set the clock in the Power Saving mode.
*
3
The clock display automatically turns to the Power Saving mode
after 8 seconds.
Notes on the display information
Characters that cannot be displayed appear as “_.”
The followings are not displayed;
total playing time for an MP3 disc and a USB device.
remaining playing time, except in the case of CD-DA.
The followings are not displayed correctly;
elapsed playing time of an MP3 file encoded using VBR (variable
bit rate).
folder and file names that do not follow either the ISO9660
Level 1, Level 2 or Joliet in the expansion format.
The followings are displayed;
remaining playing time for a CD-DA disc track.
ID3 tag information for MP3 files when ID3 version 1 and
version 2 tags are used (ID3 version 2 tag information display has
priority when both ID3 version 1 and version 2 tags are used for a
single MP3 file).
Note on the DAB/DAB+ display information
(CMT‑G1BiP only)
The following is also displayed;
up to 8 characters of service name, up to 128 characters
of DLS (Dynamic Label Segment) and up to 16
characters of ensemble label.
A value between 0 and 100 indicating the signal quality
is displayed.
Using the timers
The system offers 2 timer functions. If you use both
timers, the Sleep Timer has priority.
Sleep Timer:
You can fall asleep to music. This function works even if
the clock is not set.
Press SLEEP repeatedly.
Play Timer:
You can wake up to CD, FM reception, AM reception
DAB/DAB+ reception (CMT-G1BiP only), USB device at
a preset time. Make sure you have set the clock.
1 Prepare the sound source.
Prepare the sound source, and then press VOLUME
+/ to adjust the volume.
To start from a specific CD track or audio file, create
your own program.
2 Select the timer set mode.
Press TIMER MENU.
3 Set the play timer.
Press / repeatedly to select “PLAY SET?,” then
press ENTER.
4 Set the time to start playback.
Press / repeatedly to set the hour, then press
ENTER. Use the procedure above to set the minutes.
5 Use the same procedure as in step 4 to set the time
to stop playback.
6 Select the sound source.
Press / repeatedly until the desired sound source
appears, then press ENTER.
7 Turn off the system.
Press . The system automatically turns on before
the preset time.
If the system is on at the preset time, the Play Timer
will not play. Do not operate the system from the time
the system turns on until the playback starts.
To check the setting
1 Press TIMER MENU.
2 Press / repeatedly to select “TIMER SEL?,” and
then press ENTER.
3 Press / repeatedly to select “PLAY SEL?,” and then
press ENTER.
To cancel the timer
Repeat the same procedure as above until
“TIMER OFF?” appears in step 3, and then press
ENTER.
To change the setting
Start over from step 1.
Note
If you select a USB device as a timer and have many files or folders
on that device, it takes time for read processing, causing a slight delay
before start of play in response to the timer.
Notes for the iPod/iPhone user
Make sure the iPod/iPhone is not playing when using the Play
Timer.
The Play Timer may not be activated depending on the status of the
connected iPod/iPhone.
Tip
The Play Timer setting remains as long as the setting is not cancelled
manually.
Tuner
Severe hum or noise, or stations cannot be
received. (“TUNED” or “STEREO” flashes on the
display.)
Connect the antenna properly.
Find a location and an orientation that provide good
reception, and then set up the antenna again.
Keep the antennas away from the speaker cords and the
AC power cord to avoid picking up noise.
Turn off nearby electrical equipment.
DAB/DAB+ radio station is not received
properly (CMT‑G1BiP only).
Check all antenna connections, then perform the DAB
Automatic Scan procedure (see “Reception of DAB/
DAB+ radio station”).
The current DAB/DAB+ service may not be available.
Press +/ to select a different service.
If you have moved to another area, some services/
frequencies may have changed and you may not be able
to tune into your usual broadcast. Perform the DAB
Automatic Scan procedure to re-register the content
of broadcasts. (Performing this procedure clears all
previously stored presets.)
The DAB/DAB+ broadcast has been interrupted
(CMT‑G1BiP only)
Change the location of the system or adjust the
orientation of the antenna to increase the indicated
value of the signal quality. Refer to “Changing the
display” for further details on the signal quality.
To change the AM tuning interval
The AM tuning interval is factory-preset to 9 kHz (or
10 kHz for some areas; this function is not available on
the European model).
Use buttons on the unit to change the AM tuning
interval.
1 Tune in any AM station, and then turn off the
system.
2 Press while holding down TUNING +.
All the AM preset stations are erased.
To reset the interval to the factory preset, repeat the
procedure.
To reset the system to factory settings
If the system still does not operate properly, reset the
system to factory settings.
Use buttons on the unit to reset the unit to its factory
default settings.
1 Disconnect and reconnect the AC power cord, and
then turn on the system.
2 Press and hold and on the unit for 2 seconds
or longer until “RESET” appears.
All user-configured settings, such as preset radio
stations, timer, and the clock, are deleted.
To turn o the Automatic Standby function
This system is equipped with an Automatic Standby
function. With this function, the system enters the
Standby mode automatically in about 30 minutes when
there is no operation or audio signal output.
By default, the Automatic Standby function is turned on.
Use buttons on the unit to turn off the Automatic
Standby function.
Press and hold
while the system is on for 2
seconds or longer, until “AUTO STBY OFF” appears.
To turn on the function, repeat the procedure until
“AUTO STBY ON” appears.
Notes
“AUTO STBY” appears in the display for 2 minutes before the
system enters the Standby mode.
The Automatic Standby function is invalid for the tuner function
(FM/AM/DAB), even when you have enabled it.
The system may not enter the Standby mode automatically in the
following cases;
while an audio signal is being detected.
during playback of audio tracks or files.
while the preset Play Timer or Sleep Timer is in process.
Messages
CD Over : You have reached the end of the disc while
pressing during playback or pause.
Error : The USB device could not be recognized or an
unknown device is connected.
LOCKED : The disc tray does not open. Contact your
nearest Sony dealer.
No Device : No USB device is connected or the
connected USB device has been stopped.
No Disc : There is no disc in the player, or you have
loaded a disc that cannot be played.
No Memory : No memory media is inserted in the
USB device. Or non-formatted device (exFAT, etc.) is
inserted in the USB device.
No Preset (DAB/DAB+ only) : There is no stored preset
station.
No Service (DAB/DAB+ only) : There is no supported
DAB/DAB+ broadcast in your country or region.
No Step : All of the programmed tracks have been
erased.
No Text (DAB/DAB+ only) : There is no text
information in the received service.
No Track : Playable file on the USB device is not loaded
in the system.
Not in Use : You tried to perform a specific operation
under conditions where that operation is prohibited.
Specications
Main unit
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
(The United States model only)
With 6 ohm loads, both channels driven, from 120 — 10,000 Hz; rated
50 watts per channel minimum RMS power, with no more than 10% total
harmonic distortion from 250 milliwatts to rated output.
Amplifier section
European model:
Power output (rated): 40 watts + 40 watts (6 ohms at 1 kHz, 1% THD)
Continuous RMS power output (reference): 50 watts + 50 watts (6 ohms at
1 kHz, 10% THD)
Music power output (reference): 60 watts + 60 watts (6 ohms at 1 kHz, 10%
THD)
Other models:
Power output (rated): 40 watts + 40 watts (6 ohms at 1 kHz, 1% THD)
Continuous RMS power output (reference): 50 watts + 50 watts (6 ohms at
1 kHz, 10% THD)
Input
AUDIO IN : Sensitivity 700 mV, impedance 47 kilohms
Outputs
SPEAKERS: Accepts impedance of 6 - 16 ohms
CD player section
System: Compact disc and digital audio system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6µW
* This output is the value measurement at a distance of 200mm from the
objective lens surface on the Optical Pick-up Block with 7mm aperture.
Frequency response: 20 Hz 20 kHz
Signal-to-noise ratio: More than 90 dB
Dynamic range: More than 90 dB
Tuner section
AM tuner section:
Tuning range:
European model:
531 — 1,602 kHz (with 9 kHz tuning interval)
Other models:
530 — 1,710 kHz (with 10 kHz tuning interval)
531 — 1,710 kHz (with 9 kHz tuning interval)
Antenna: AM loop antenna
Intermediate frequency: 400 kHz
FM tuner section:
FM stereo, FM superheterodyne tuner
Tuning range:
87.5 MHz — 108.0 MHz (50 kHz step)
Antenna: FM lead antenna
Antenna terminals: 75 ohms unbalanced
Intermediate frequency: 200 kHz, 250 kHz, 300 kHz, 350 kHz, 400 kHz
DAB/DAB+ tuner section (CMT-G1BiP only)
FM stereo, DAB/FM superheterodyne tuner
Frequency range*
Band-III: 174.928 (5A) MHz — 239.200 (13F) MHz
* For details, see “DAB/DAB+ frequency table” below.
Antenna: DAB lead antenna
Antenna terminal: 75 ohms, F female
DAB/DAB+ frequency table (Band‑III)
Frequency Label Frequency Label
174.928 MHz 5A 209.936 MHz 10A
176.640 MHz 5B 211.648 MHz 10B
178.352 MHz 5C 213.360 MHz 10C
180.064 MHz 5D 215.072 MHz 10D
181.936 MHz 6A 216.928 MHz 11A
183.648 MHz 6B 218.640 MHz 11B
185.360 MHz 6C 220.352 MHz 11C
187.072 MHz 6D 222.064 MHz 11D
188.928 MHz 7A 223.936 MHz 12A
190.640 MHz 7B 225.648 MHz 12B
192.352 MHz 7C 227.360 MHz 12C
194.064 MHz 7D 229.072 MHz 12D
195.936 MHz 8A 230.784 MHz 13A
197.648 MHz 8B 232.496 MHz 13B
199.360 MHz 8C 234.208 MHz 13C
201.072 MHz 8D 235.776 MHz 13D
202.928 MHz 9A 237.488 MHz 13E
204.640 MHz 9B 239.200 MHz 13F
206.352 MHz 9C
208.064 MHz 9D
* Frequencies are displayed to two decimal places on this system.
iPod/iPhone section
Compatible iPod/iPhone models:
iPod touch 4th generation
iPod touch 3rd generation
iPod touch 2nd generation
iPod touch 1st generation
iPod nano 6th generation
iPod nano 5th generation (video camera)
iPod nano 4th generation (video)
iPod nano 3rd generation (video)
iPod nano 2nd generation (aluminum)
iPod classic
iPhone 4
iPhone 3G
iPhone 3GS
iPhone
“Made for iPod,” and “Made for iPhone” mean that an electronic accessory has
been designed to connect specifically to iPod or iPhone, respectively, and has
been certified by the developer to meet Apple performance standards. Apple
is not responsible for the operation of this device or its compliance with safety
and regulatory standards. Please note that the use of this accessory with iPod
or iPhone may affect wireless performance.
USB section
Supported bit rate:
MP3 (MPEG 1 Audio Layer-3): 32 kbps 320 kbps, VBR
WMA: 48 kbps 192 kbps, VBR
AAC: 48 kbps 320 kbps
Sampling frequencies:
MP3 (MPEG 1 Audio Layer-3): 32/44.1/48 kHz
WMA: 44.1 kHz
AAC: 44.1 kHz
(USB) port: Type A, maximum current 1A
Speaker
Speaker system: 2 way speaker system, Bass reflex
Speaker units:
Woofer 130 mm, cone type
Tweeter 25 mm, soft dome type
Rated impedance: 6 ohms
Dimensions (W/H/D):
Approx. 160 mm × 270 mm × 252 mm
Mass: Approx. 3.8 kg net per speaker
Troubleshooting
1 Make sure the AC power cord and speaker cords are
correctly and firmly connected.
2 Find your problem in the checklist below, and take
the indicated corrective action.
If the issue persists, contact your nearest Sony dealer.
If the STANDBY indicator ashes
Immediately unplug the AC power cord, and check
the following items.
Are the + and speaker cords short-circuited?
Is anything blocking the ventilation holes of the
system?
After the STANDBY indicator stops flashing,
reconnect the AC power cord, and turn on the
system. If the issue persists, contact your nearest Sony
dealer.
General
The system does not turn on.
Is the AC power cord plugged in?
The system has entered the Standby mode
unexpectedly.
This is not a malfunction. The system enters the
Standby mode automatically in about 30 minutes when
there is no operation or audio signal output. See “To
turn off the Automatic Standby function.”
The clock setting or the Play Timer operation
has been cancelled unexpectedly.
If about a minute elapses with no operation, the
clock setting or the Play Timer setting is cancelled
automatically. Perform the operation again from the
beginning.
There is no sound.
Are the + and speaker cords short-circuited?
Are you using only the supplied speakers?
Is anything blocking the ventilation holes of the
system?
The specified station may have temporarily stopped
broadcast.
Sound comes from one channel, or the left and
right volumes are unbalanced.
Place the speakers as symmetrically as possible.
Connect only the supplied speakers.
Severe hum or noise.
Move the system away from sources of noise.
Connect the system to a different wall outlet.
Install a noise filter (not supplied) to the AC power
cord.
The remote does not function.
Remove any obstacles between the remote and the
remote sensor on the unit, and position the unit away
from fluorescent lights.
Point the remote at the remote sensor on the unit.
Move the remote closer to the system.
The STANDBY indicator remains lit after
unplugging the AC power cord.
The STANDBY indicator may not turn off immediately
after unplugging the AC power cord. The indicator
will turn off after about 40 seconds. This is not a
malfunction.
CD/MP3 player
The sound skips, or the disc will not play.
Wipe the disc clean, and replace it.
Move the system to a location away from vibration (for
example, on top of a stable stand).
Move the speakers away from the system, or place them
on separate stands. At high volume, speaker vibration
may cause the sound to skip.
Play does not start from the first track.
Return to the Normal Play mode by pressing PLAY
MODE/TUNING MODE repeatedly until both “PGM”
and “SHUF” disappear.
Starting playback takes more time than usual.
The following discs can increase the time it takes to
start playback;
a disc recorded with a complicated tree structure.
a disc recorded in multisession mode.
a disc that has not been finalized (a disc to which
data can be added).
a disc that has many folders.
iPod/iPhone
There is no sound.
Make sure the iPod/iPhone is connected securely.
Make sure the iPod/iPhone is playing music.
Make sure the iPod/iPhone is updated with the latest
software. If not, update the iPod/iPhone before using
with the system.
Adjust the volume.
The sound is distorted.
Make sure the iPod/iPhone is connected securely.
Turn down the volume.
Set the “EQ” setting of the iPod/iPhone to “Off” or
“Flat.”
The iPod/iPhone does not function.
If the battery of the iPod/iPhone is empty, it may not
work with this system. In such a case, recharge it with a
computer, etc. then connect it to the system.
Shut down any other iOS applications running on the
iPod/iPhone. For details, refer to the operation manual
supplied with the iPod/iPhone.
Make sure the iPod/iPhone is connected securely.
Make sure the iPod/iPhone is updated with the latest
software. If not, update the iPod/iPhone before using
with the system.
Because the operation of the system and the iPod/
iPhone are different, you may not operate the iPod/
iPhone using buttons on the remote or unit. In this
case, use the control buttons on the iPod/iPhone.
The iPod/iPhone cannot be charged.
If the battery of the iPod/iPhone is empty, the system
may not be able to charge it even if you connect it to
the system. In such a case, recharge it with a computer,
etc. then connect it to the system.
Make sure the iPod/iPhone is connected securely.
You can use the system as a battery charger for iPod/
iPhone only when the system is on.
The ring volume of the iPhone does not
change.
Adjust the ring volume on the iPhone.
USB device
Are you using a supported USB device?
If you connect an unsupported USB device, the
following problems may occur. Check the information
on the websites about compatible USB devices with
URLs listed under “Playing a file of the USB device.”
The USB device is not recognized.
File or folder names are not displayed on this system.
Playback is not possible.
The sound skips.
There is noise.
A distorted sound is output.
There is no sound.
The USB device is not connected correctly. Turn off the
system, then reconnect the USB device.
There is noise, skipping, or distorted sound.
Turn off the system, then reconnect the USB device.
The music data itself contains noise, or the sound is
distorted. Noise may have been entered when creating
music data due to the conditions of the computer.
Create the music data again.
The bit rate used when encoding the files was low. Send
files encoded with higher bit rates to the USB device.
“Reading” is displayed for an extended time, or
it takes a long time before playback starts.
The reading process can take a long time in the
following cases.
There are many folders or files on the USB device.
The file structure is extremely complex.
The memory capacity is excessive.
The internal memory is fragmented.
Erroneous display
Send the music data to the USB device again, as
the data stored in the USB device may have been
corrupted.
The character codes that can be displayed by this
system are numbers and alphabets only. Other
characters are not displayed correctly.
The USB device is not recognized.
Turn off the system and reconnect the USB device,
then turn on the system.
Check the information on the websites about
compatible USB devices with URLs listed under
“Playing a file of the USB device.”
The USB device does not work properly. Refer to the
USB device operation manual for how to deal with this
problem.
Play does not start.
Turn off the system and reconnect the USB device,
then turn on the system.
Check the information on the websites about
compatible USB devices with URLs listed under
“Playing a file of the USB device.”
Press to start playback.
Play does not start from the first track.
Set the play mode to the Normal Play mode.
Files cannot be played back.
The audio file does not have the extension “.mp3,”
“.wma” or “.m4a.”
The data is not stored in MP3/WMA/AAC format.
USB storage devices formatted with file systems other
than FAT16 or FAT32 are unsupported.*
If you use a partitioned USB storage device, only files
on the first partition can be played.
Files that are encrypted or protected by passwords, etc.
cannot be played back.
* This system supports FAT16 and FAT32, but some USB storage
devices may not support all of these FAT. For details, see the
operation manual of each USB storage device or contact the
manufacturer.
Not Supported : An unsupported USB device or iPod is
connected or the iPod/iPhone whose battery is empty
is connected.
Protect : You tried to exceed the allowed input of the
sound level to the amplifier section.
This message is displayed along with the sound
interruption when you turn up the volume during
playback of a CD with a recording level that is too loud,
or when you play back a CD which contains input
signals that are too large.
Adjust the volume using the VOLUME or BASS/
TREBLE to turn off the message. We recommend a
volume level where the sound is not blasting out of the
speakers.
If the “PROTECT” message does not disappear, make
sure the speaker cord is connected firmly.
Push STOP! : You pressed PLAY MODE/TUNING
MODE during playback in the CD function.
Step Full! : You tried to program more than 25 tracks or
files (steps).
TIME NG! : The Play Timer start and end times are set to
the same time.
Precautions
Discs that this system CAN play
Audio CD
CD-R/CD-RW (audio data/MP3 files)
Discs that this system CANNOT play
CD-ROM
CD-R/CD-RW other than those recorded in music
CD format or MP3 format conforming to ISO9660
Level 1/Level 2, Joliet
CD-R/CD-RW recorded in multisession that have not
ended by “closing the session”
CD-R/CD-RW of poor recording quality,
CD-R/CD-RW that have scratches or are dirty,
or CD-R/CD-RW recorded with an incompatible
recording device
CD-R/CD-RW which is finalized incorrectly
Discs containing files other than MPEG 1 Audio
Layer-3 (MP3) files
Discs of non-standard shape (for example, heart,
square, star)
Discs that have adhesive tape, paper, or sticker attached
to them
Rental or used discs with attached seals where the glue
extends beyond the seal
Discs that have labels printed using ink that feels tacky
when touched
Notes on discs
Before playing, wipe the disc with a cleaning cloth from
the center out to the edge.
Do not clean discs with solvents, such as benzine,
thinner, or commercially available cleaners or anti-
static spray intended for vinyl LPs.
Do not expose discs to direct sunlight or heat sources
such as hot air ducts, nor leave it in a car parked in
direct sunlight.
On safety
Completely disconnect the AC power cord (mains
lead) from the wall outlet (mains) if it is not going to be
used for an extended period of time. When unplugging
the unit, always grip the plug. Never pull the cord itself.
Should any solid object or liquid get into the system,
unplug the system, and have it checked by qualified
personnel before operating it again.
The AC power cord can be changed only by a qualified
service facility.
On placement
Do not place the system in an inclined position or in
locations that are extremely hot, cold, dusty, dirty, or
humid or lacking adequate ventilation, or subject to
vibration, direct sunlight or a bright light.
Be careful when placing the unit or speakers on
surfaces that have been specially treated (for example,
with wax, oil, polish) as staining or discoloration of the
surface may result.
If the system is brought directly from a cold to a warm
location or is placed in a very damp room, moisture
may condense on the lens inside the CD player, and
cause the system to malfunction. In this situation,
remove the disc, and leave the system turned on for
about an hour until the moisture evaporates.
On heat buildup
Heat buildup on the unit during operation is normal
and is not cause for alarm.
Do not touch the cabinet if it has been used
continuously at a high volume because the cabinet may
have become hot.
Do not obstruct the ventilation holes.
On the speaker system
This speaker system is not magnetically shielded, and
the picture on nearby TV sets may become magnetically
distorted. In this situation, turn off the TV, wait 15 to
30 minutes, and turn it back on.
If there is no improvement, move the speakers far away
from the TV.
Cleaning the cabinet
Clean this system with a soft cloth slightly moistened
with a mild detergent solution. Do not use any type of
abrasive pads, scouring powder, or solvents, such as
thinner, benzine, or alcohol.
General
Power requirements:
AC 230 V, 50/60 Hz
Power consumption: 50 watts
Dimensions (W/H/D) (excl. speakers):
Approx. 220 mm × 133 mm × 335 mm
Mass (excl. speakers): Approx. 5.3 kg
Supplied accessories: Remote Commander (1), R03 (Size AAA) batteries (2),
AC power cord (1), FM lead antenna (1), AM loop antenna (1), DAB lead
antenna (1) (CMT-G1BiP only), Speaker cords (2) , Speaker pads (8)
Design and specifications are subject to change without notice.
Standby power consumption: 0.5 W