Filter
Top Products
CMT-BX7DAB.GB.3-095-508-11(1)
16
GB
1
Select the USB function.
Press USB
.
2
Connect an optional USB device
(Digital music player or USB
storage media) to the (USB)
port
as shown below.
When USB cable connection is
necessary, connect the USB cable
supplied with the USB device to be
connected.
See the operation manual supplied
with the USB device to be connected
for details on the operation method.
When the USB device is connected,
the display changes as follows:
“READING”
“ATRAC AD
1)
” or
“STORAGE DRIVE
2)
”
1)
When connecting a digital music player.
2)
When connecting USB storage media. e
volume label is displayed next if recorded.
Note
It may take about 10 seconds before
“READING” appears depending on the type of
USB device connected.
3
Start playback.
Press (or USB on the unit)
.
4
Adjust the volume.
Press VOLUME +/ (or VOL +/ on
the unit)
.
Other operation
To Press
Pause playback (or USB on
the unit)
. To resume
play, press the button
again*.
Stop playback
. To resume play,
press (or USB
on the unit)
.
To cancel resume play,
press
again.
Select a folder
+/
.
Select a le /
.
Find a point in
a le
Hold down /
during playback,
and release the button
at the desired point.
Select Repeat
Play
REPEAT
repeatedly
until “REP” or “REP1”
appears.
Remove the
USB device
Hold down
on
the unit in stop mode
until “NO DEVICE”
appears, then remove
the USB device.
* When playing a VBR MP3 le, the system
may resume playback from a dierent point.
To change the play mode
Press PLAY MODE
repeatedly while
the USB device is stopped. You can
select normal play (“ ” for all les in
the folder on the digital music player),
shue play (“SHUF” or “ SHUF”), or
program play (“PGM”).
USB device (Digital
music player or USB
storage media)