Sony CMT-CPX22 Stereo System User Manual


 
18
GB
Tips
When you record on both sides, be sure to start from
the front side. If you start from the reverse side,
recording stops at the end of the reverse side.
If you select both sides recording and the tape
reaches the end of the front side part-way through a
track, the entire track is recorded again from the
beginning of the reverse side.
You can record just the portions you like from a
CD, tape or radio program on a tape.
You can also record from connected
components (see “Hooking up optional
components” on page 25).
Use buttons on the unit for the operation.
1 Load a recordable tape into deck B.
2 Press TAPE A/B to select deck B, then
press nN repeatedly to select
recording side. And press x to stop
playback.
3 Press PLAY MODE on the remote
repeatedly to select “g” to record on
one side. Select “j” (or “RELAY”) to
record on both sides.
4 Press one of the following buttons to
select the desired source to record.
CD: To record from this system’s CD
player.
TAPE A/B: To record from this system’s
tape deck A.
TUNER/BAND: To record from this
system’s tuner.
VIDEO/MD: To record from the optional
component connected to the VIDEO/MD
IN jacks.
5 Press z START.
Deck B stands by for recording.
“REC” flashes.
6 Press z START, then start playing the
desired source to record.
Recording starts.
Other operations
Recording on a tape
manually
— Manual Recording
To Do this
Stop recording Press x.
Pause recording Press z START on the unit.