Filter
Top Products
9
CD
To
Select a CD
Remove a CD
Play repeatedly
(Repeat Play)
Tip
When a CD is selected or playing back, one of the
indicators for CD 1 - 3 lights up green. When a CD is
loaded on a tray, the respective indicators for CD 1 -
3 light(s) up orange.
Note
You cannot perform Repeat Play when you select
“SHUFFLE” with the 1 DISC indicator turned off.
Programming the CD
tracks
–– Program Play
You can make a program of up to 25 tracks in
any order that you want, selected from the
tracks on all three CDs.
1 Turn FUNCTION (or press FUNCTION
on the remote repeatedly) until “CD”
appears in the display.
2 Press PLAY MODE repeatedly until
“PGM” appears in the display.
3 Press any one of the buttons, CD 1 - 3
(or DISC1 - 3 on the remote), to select
the desired CD.
To program all the tracks on a CD at one
time, go to step 5 while “AL” is displayed.
4 Press CD ./> repeatedly until the
desired track number appears in the
display.
3 243
PGM
5 Press PLAY MODE.
The selected track is programmed.
The selection number appears in the
display.
6 To program additional tracks, repeat
steps 3 through 5.
7 Press CD u (or N on the remote).
Selected track
number
Total playing time
Do this
Press any one of the
buttons, CD 1 - 3 (or
DISC1 - 3 on the remote).
The CD changes
automatically and the
selected CD starts playing
back. When you press any
one of the buttons, CD 1 - 3
(or DISC1 - 3 on the
remote), during playback,
the CD changes
automatically and the
selected CD starts playing
back.
Press any one of the Z
buttons for CD 1 - 3 to open
the tray containing the
desired CD.
Press REPEAT repeatedly
during playback until
“REPEAT” or
“REPEAT 1” appears in the
display.
REPEAT: For all the tracks
on the CD(s) (up to five
times).
REPEAT 1: For only the
currently playing track.
To cancel playing
repeatedly, press REPEAT
repeatedly until “REPEAT”
and “REPEAT 1” disappear
from the display.
continued