Filter
Top Products
Basic Operations
Basic Operations
11
EN
3 Press r to start recording. (( is
depressed automatically).
Pp6
To Press
Stop recording p6
Pause recording P
Press the button again to
resume recording.
Turn on/off the power OPERATE (or POWER, see
page 2)
Tips
• Adjusting the volume or
the audio emphasis
(page 20) will not affect
the recording level.
• CFD-V34L/V37L/930L
only:
If the MW/LW program
makes a whistling
sound after you’ve
pressed r in step 3,
press PLAY MODE/ISS
(Interference Suppress
Switch) repeatedly until
the noise is at a
minimum.
• For the best results, use
the AC power as a
power source for
recording.
• To erase a recording,
proceed as follows:
1
Press TAPE until
“TAPE” appears in the
display. Insert the tape
whose recording you
want to erase into the
tape compartment.
2 Press r.
OPERATE
(or POWER)
Use these buttons for additional operations