Filter
Top Products
Basic Operations
Basic Operations
11
GB
3 Press z to start recording
(N is depressed automatically).
Use these buttons for additional operations
Tips
• Adjusting the volume or
the audio emphasis (see
page 21) will not affect
the recording level.
• CFD-G30L/G50L only:
If the MW/LW
programme makes a
whistling sound after
you’ve pressed z in
step 3, press PLAY
MODE•MONO/ST ISS
(Interference suppress
switch) repeatedly until
the noise is at a
minimum.
• For the best results, use
the AC power as a
power source.
• To erase a recording,
proceed as follows:
1 Insert the tape whose
recording you want to
erase.
2 Press X.
3 Press N.
4 Press z.
5 Press X.
To Press
stop recording xZ
pause recording X
Press the button again to
resume recording.
turn on/off the player OPERATE (or POWER, see
page 2)
xZ
X
OPERATE
(or POWER)
PLAY MODE
MONO/ST ISS