Filter
Top Products
23
EN
Additional Information
Troubleshooting
Remedy
• Connect the AC power cord to a wall outlet
securely.
• Make sure the batteries are inserted correctly.
• Replace all the batteries with new ones if they
are weak.
• You cannot turn on the player with the remote
when you operate the player on batteries.
• Make sure the function you want to use appears
in the display window.
• Adjust the volume.
• Unplug the headphones when listening through
speakers.
• Make sure that the CD compartment is closed.
• Place the CD with the label surface up.
• Clean the CD.
• Take out the CD and leave the CD compartment
open for about an hour to dry moisture
condensation.
• Make sure “Cd” appears in the display.
• Reduce the volume.
• Clean the CD, or replace it if the CD is badly
damaged
• Place the player in a location free from
vibration.
• Replace all the batteries with new ones if they
are weak.
• Move the player away from the TV.
• If you are using the remote while listening to
AM or MW/LW radio, noise may be heard.
This is unavoidable.
• If you are listening to an FM program near the
TV with an indoor antenna, move the player
away from the TV.
GeneralCD Player
Symptom
The power is not on.
There is no audio.
The CD does not play/“no disc”
lights in the display even when a
CD is in place.
The sound drops out.
The audio is weak or has poor
quality.
The picture of your TV becomes
unstable.
Radio
continued