Filter
Top Products
8
Other functions
Changing the sound
settings
Adjusting the sound
characteristics — BAL/FAD
You can adjust the balance and fader.
1 Press (SEL) repeatedly until “BAL” or
“FAD” appears.
The item changes as follows:
LOW* t MID* t HI* t
BAL (left-right) t FAD (front-rear)
* When EQ3 is activated (page 8).
2 Press the volume +/– button
repeatedly to adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Note
Adjust within 3 seconds of selecting the item.
Adjusting the equalizer curve
— EQ3
You can adjust and store the equalizer settings
for different tone ranges.
1 Select a source, then press (EQ3)
repeatedly to select the EQ3 type.
2 Press (SEL) repeatedly until “LOW,”
“MID” or “HI” appears.
3 Press the volume +/– button
repeatedly to adjust the selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
Repeat steps 2 and 3 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold ( SEL) before the setting is
complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Adjusting setup items
The following items can be set (follow the page
reference for details):
“z” indicates the default settings.
1 Press (SEL) and the desired button
simultaneously.
*1 When a CD TEXT disc is played.
*2 When the unit is turned off.
After the setting is complete, the display returns
to the normal play/reception mode.
Press Setting items
(SEL) + (2)
CT (Clock Time)
To set “CT-ON” or “CT-OFF”
(
z) (page 6, 7).
(SEL) + (3)
A.SCRL*
1
(Auto Scroll)
To scroll long displayed items
automatically when the track
is changed.
–“ON”: to scroll.
–“OFF” (
z): to not scroll.
(SEL) + (4)
DEMO*
2
(Demonstration)
To set “DEMO-ON” (z) or
“DEMO-OFF” (page 4).
(SEL) + (6)
BEEP
To set “BEEP-ON” (z) or
“BEEP-OFF.”