Filter
Top Products
13
CDX-M7850
2-586-657-21 (1)
H:\Data Disk\2586657211\258665721CDXM7850EUR\01GB02CD-EUR.fm masterpage:RightH:\Data Disk\2586657211\258665721CDXM7850EUR\01GB02CD-EUR.fm masterpage:Right
Skipping discs
1 During playback, press (ENTER) until
“DISC” appears.
2 Rotate the SEEK control dial until the desired
disc appears.
Skipping groups and discs with the
card remote commander
1 During playback, press M or m.
Repeat and shuffle play
1 During playback, press (1) (REP) or (2)
(SHUF) repeatedly until the desired setting
appears.
*1 When one or more CD/MD changers are
connected.
*2 When one or more CD changers, or two or more
MD changers are connected.
To return to normal play mode, select “REP-off”
or “SHUF-off.”
Tip
“SHUF-All” will not shuffle tracks between CD units
and MD changers.
Labelling a disc
When you play a disc in a CD changer with the
CUSTOM FILE function, you can label each
disc with a custom name up to 8 characters (Disc
Memo).
If you label a disc, the name appears on the list
(page 14).
1 While playing a disc that you want to label,
press (MENU).
2 Rotate the SEEK control dial until “Edit”
appears, then press (ENTER).
3 Rotate the SEEK control dial until “Name
Edit” appears, then press (ENTER).
4 Rotate the SEEK control dial until the desired
character appears.
The character changes as follows:
A y B y C ... y 0 y 1 y 2 ... y +
y – y
... y (blank space) y A
To move the digital indication, press
(ENTER).
Repeat this operation until the entire name is
entered.
The confirmation dialog appears after
entering the far right character and pressing
(ENTER).
5 Rotate the SEEK control dial to select “YES,”
then press (ENTER).
The setting is complete and the display
returns to the normal play mode.
To display the name, press (DSPL) on the card
remote commander during playback.
Tips
• To correct or erase a character, overwrite or enter
“
.”
• The Disc Memo always takes priority over any
prerecorded title.
• You can label a disc on the unit if a changer with the
CUSTOM FILE function is connected.
• “REP-Track” and all shuffle play are suspended until
the labelling is complete.
With the card remote commander
In steps 2 to 4: press M or m instead of the SEEK
control dial; in step 4: press < or , to move the
digital indication; in step 5: press < or , instead of
the SEEK control dial.
Deleting the custom name
1 Select the unit that has stored the custom name
you want to delete, then press (MENU).
2 Rotate the SEEK control dial until “Edit”
appears, then press (ENTER).
3 Rotate the SEEK control dial until “Name
Delete” appears, then press (ENTER).
The stored name will appear.
4 Rotate the SEEK control dial to select the
name you want to delete.
5 Press (ENTER).
The confirmation dialog appears.
6 Rotate the SEEK control dial to select “YES,”
then press (ENTER).
To skip Press M or m.
group and release (hold for a
moment).
group
continuously
within 2 seconds of first
releasing.
discs repeatedly.
discs
continuously
then, press again within 2
seconds and hold.
Select To play
REP-Disc*
1
disc repeatedly.
SHUF-
Changer*
1
tracks in the changer in random
order.
SHUF-All*
2
tracks in all units in random
order.
continue to next page t