Filter
Top Products
31
Changing the sound and
display settings
The following items can be set:
Set (setting)
•Clock (page 9)
•CT (Clock Time) (page 23)
•Beep — to turn the beeps on or off.
•RM (Rotary Commander) — to change the
operative direction of the controls of the
rotary commander.
— Select “norm” to use the rotary
commamder as the factory-set position.
— Select “rev” when you mount the rotary
commander on the right side of the
steering column.
•English/Spanish/Portuguese/Swedish — to
change the display language to English,
Spanish, Portuguese or Swedish.
Dis (Display)
•Dimmer — to change the brightness of the
display.
— Select “Auto” to dim the display only
when you turn the lights on.
— Select “on” to dim the display.
— Select “off” to deactivate Dimmer.
•Contrast — to adjust the contrast if the
indications in the display are not
recognisable because of the unit’s installed
position.
•D.Info (Dual Information) — to display the
clock and the play mode at the same time (on)
or to display the information alternately (off).
•M.Dspl (Motion Display) — to turn the
motion display on or off.
•A.Scrl (Auto Scroll)*
1
(page 11)
1 Press (MENU).
2 Press M or m repeatedly until the desired
item appears.
Each time you press m, the item changes as
follows:
Example
Clock t CT t Beep t RM t English/
Spanish/Portuguese/Swedish t D.Info t SA
t Dimmer t Contrast t M.Dspl t A.Scrl*
* When no CD or MD is playing, this item will
not appear.
Note
The displayed item will differ depending on
the source.
Tip
You can easily switch among categories (“Set,“
“Snd,“ “P/M“ (Play Mode) and “Dis“) by
pressing M or m for two seconds.
3 Press (ENTER).
After the mode setting is completed, the
display returns to normal play mode.