Filter
Top Products
12
Receiving the stored
stations
1 Press repeatedly to select the
radio.
2 Press repeatedly to select the
band.
3 Press the number button ( to ) on
which the desired station is stored.
If preset tuning does not work
— Automatic tuning/Local Seek Mode
Automatic tuning:
Press either side of to search
for the station.
Scanning stops when the unit receives a
station. Press either side of
repeatedly until the desired station is
received.
Local Seek Mode:
If the automatic tuning stops too
frequently, press repeatedly until
“LCL” indicator appears.
Only the stations with relatively strong
signals will be tuned in.
Tip
If you know the frequency of the station you want
to listen to, press either side of until
the desired frequency appears (manual tuning).
If FM stereo reception is poor
— Monaural Mode
During radio reception, press
repeatedly until “MONO” indicator
appears.
The sound improves, but becomes
monaural (“ST” disappears).
To return to normal, press again.
Storing only the desired
stations
You can manually preset the desired stations
on any chosen number button.
1 Press repeatedly to select the
radio.
2 Press repeatedly to select the
band.
3 Press either side of to tune
in the station that you want to store.
4 Press the desired number button ( to
) until "MEM" appears.
The number button indication appears in
the display.
Note
If you try to store another station on the same
number button, the previously stored station will
be erased.
“LCL” indicator is displayed.
“MONO” indicator is displayed.