Filter
Top Products
18
Repeat and shuffle play
1 During playback, press (1) (REP) on
the card remote commander or (SHUF)
on the unit repeatedly until the desired
setting appears.
To return to normal play mode, select “Repeat
off” or “Shuffle off.”
After about 3 seconds, the setting is complete.
Operating an iPod directly
— Passenger control
You can operate an iPod connected to the dock
connector directly.
1 During playback, press and hold
(MODE).
“Mode iPod” appears and you will be able to
operate the iPod directly.
To exit the passenger control
Press and hold (MODE).
Then “Mode Audio” will appear and the play
mode will change to “Resuming.”
Notes
• The volume can be adjusted only by the unit.
• If this mode is canceled, the repeat setting will be
turned off.
Other functions
Changing the sound settings
Adjusting the sound
characteristics
1 Press the multi way encoder.
2 Rotate the multi way encoder until the
desired menu item appears, then
press it.
3 Use the multi way encoder to select
the setting, then press it.
4 Press (BACK).
The setting is complete and the display
returns to normal play/reception mode.
The following items can be set:
The operation of the multi way encoder will
differ depending on the items.
: Push the multi way encoder up/down
: Push the multi way encoder left/right
: Rotate the multi way encoder
Select To play
Repeat Track track repeatedly.
Repeat Album album repeatedly.
Repeat Podcast podcast repeatedly.
Repeat Artist artist repeatedly.
Repeat Playlist playlist repeatedly.
Repeat Genre genre repeatedly.
Shuffle Album album in random order.
Shuffle Podcast podcast in random order.
Shuffle Artist artist in random order.
Shuffle Playlist playlist in random order.
Shuffle Genre genre in random order.
Shuffle Device device in random order.
EQ3 Parametric Preset ( or )
Selects an equalizer curve from 7 music types.
EQ3 Parametric Tune*
1
Custom equalizer settings. See “Customizing
the equalizer curve — EQ3 Parametric Tune”
Subwoofer Tune & LPF
Phase (, or press (MODE))
Selects the phase: “Normal,” “Reverse.”
FREQ ()
Selects the subwoofer cut-off frequency:
“80Hz,” “100Hz,” “120Hz,” “140Hz,” “160Hz,”
“off.”
Level ()
Adjusts the subwoofer volume: “+10 dB” –
“0 dB” – “–10 dB.”
(“– ∞” is displayed at the lowest setting.)
HPF & Speaker Select
Speaker ()
Selects the Speaker: “All,” “Front”, or “Rear.”
FREQ ()
Selects the cut-off frequency: “off,” “80Hz,”
“100Hz,” “120Hz,” “140Hz,” “160Hz.”
DM+ Advanced*
2
( or )
Improves digitally compressed sound, such as
MP3.
To activate the DM+ Advanced function, set
“on.” To cancel, set “off.”