Filter
Top Products
7
E GP*
1
/ALBM*
2
+/– buttons*
3
To select preset stations/skip groups (press);
skip groups continuously (press and hold).
F MENU button
To enter menu.
G Display window
H BBE MP button 2, 12, 13
To activate the BBE MP function.
I OPEN button 5
J IMAGE button 2
To select the display image.
Movie mode 1-3 t Spectrum analyzer
mode 1-5 t Space Producer mode t Wall
paper mode 1-3 t normal play/reception
mode
K DSPL (display)/PTY (Programme
Type) button 8, 10
To change display items; to select PTY in
RDS.
L ENTER button
To complete a setting.
M SOURCE button
To power on/change the source (Radio/CD/
MD*
5
/AUX).
N MODE button 8, 17
To select the radio band (FM/MW/LW)/
select the unit*
4
.
O Number buttons
Radio:
To receive stored stations (press); store
stations (press and hold).
CD/MD*
5
:
(1): REP 8, 18
(2): SHUF 8, 18
(6): PAUSE*
6
To pause playback. To cancel, press again.
P AF (Alternative Frequencies)/TA
(Traffic Announcement) button
10
To set AF and TA/TP in RDS.
Q HDEQ button 11, 12
To select an equalizer type (Flat, Xplod,
Refined Vocal, Over Drive, Virtual Sub,
Natural Cruise or Rear Drive)
R RESET button 4
S Z (eject) button 5
To eject the disc.
T Disc slot 5
To insert the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
wa </, (SEEK –/+) buttons
To control CD/Radio, the same as (SEEK)
–/+ on the unit.
ws VOL (volume) +/– button
To adjust volume.
wd ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wf SOUND button
To select sound items.
wg LIST button 9, 18
To list up.
wh M/m (+/–) buttons
To control CD, the same as (GP/ALBM) +/–
on the unit.
wj SCRL (scroll) button 8
To scroll the display item.
*1 When an ATRAC CD is played.
*2 When an MP3/WMA is played.
*3 If the changer is connected, the operation is
different, see page 17.
*4 When a CD/MD changer is connected.
*5 When an MD changer is connected.
*6 When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 21.