Filter
Top Products
17
If these solutions do not help improve the situation,
consult your nearest Sony dealer.
If you take the unit to be repaired because of CD
playback trouble, bring the disc that was used at the
time the problem began.
FAILURE (Illuminates until any button is pressed.)
The connection of speakers/amplifiers is incorrect.
tSee the installation/connections manual of this
model to check the connection.
FAILURE (Illuminates for about 1 second.) (CDX-
GT320/GT32W only)
When the SAT tuner is connected, storing an SAT
radio channel into a preset failed.
tBe sure to receive the channel that you want to
store, then try it again.
LOAD (CDX-GT320/GT32W only)
The unit/changer is loading the disc.
tWait until loading is complete.
L. SEEK +/–
The local seek mode is on during automatic tuning.
NO DISC (CDX-GT320/GT32W only)
The disc is not inserted in the CD/MD changer.
tInsert discs in the changer.
NO INFO (CDX-GT320/GT32W/GT220/GT22W
only)
Text information is not written in the MP3/WMA file.
NO MAG (CDX-GT320/GT32W only)
The disc magazine is not inserted in the CD changer.
tInsert the magazine in the changer.
NO MUSIC
The disc does not contain a music file.
tInsert a music CD in this unit or MP3 playable
changer.
NO NAME
A disc/track name is not written in the track.
NOTREADY (CDX-GT320/GT32W only)
The lid of the MD changer is open or the MDs are not
inserted properly.
tClose the lid or insert the MDs properly.
OFFSET
There may be an internal malfunction.
tCheck the connection. If the error indication
remains on in the display, consult your nearest
Sony dealer.
PUSH EJT (CDX-GT220/GT22W/GT120 only)
The disc cannot be ejected.
tPress Z (eject) (page 6).
READ
The unit is reading all track and album information on
the disc.
tWait until reading is complete and playback starts
automatically. Depending on the disc structure, it
may take more than a minute.
RESET (CDX-GT320/GT32W only)
The CD unit and CD/MD changer cannot be operated
due to a problem.
tPress the RESET button (page 5).
“” or “”
During reverse or fast-forward, you have reached the
beginning or the end of the disc and you cannot go any
further.
“”
The character cannot be displayed with the unit.
*1 The disc number of the disc causing the error
appears in the display.
*2 If an error occurs during playback of a CD or MD,
the disc number of the CD or MD does not appear
in the display.