Filter
Top Products
11
The following items can be set (follow the page
reference for details):
“
z” indicates the default settings.
Setup
Display
Receive Mode
Sound
Edit
*1 When the unit is turned off.
*2 In such cases, some FM stereo broadcasts may
become monaural while in the stereo reception
mode.
Using optional equipment
CD/MD changer
Selecting the changer
1 Press (SOURCE) repeatedly until “CD” or
“MD” appears.
Clock Adjust (Clock Adjust) (page 4)
Beep
To set “on” (
z) or “off.”
RM (Rotary Commander)
To change the operative direction of the rotary
commander controls.
–“Normal” (
z): to use the rotary commander in
the factory-set position.
–“Reverse”: when you mount the rotary
commander on the right side of the steering
column.
AUX-A*
1
(AUX Audio)
To turn the AUX source display “on” (
z) or
“off” (page 13).
Clock (Clock Information)
To display the clock and the display items/image
at the same time.
–“on”: to display at the same time.
–“off” (
z): to not display at the same time.
A.Image (Auto Image)
Auto Image mode automatically steps (every 10
seconds) through the display images.
–“off” (
z): to not change the image
automatically.
–“ALL”: to step repeatedly through the display
images in all display modes.
–“SA”: to step repeatedly through the display
images of Spectrum analyzer mode.
–“Movie”: to step repeatedly through the
display images of Movie mode.
INFO (Display Information)
To display the items (depending on the source,
etc.) at the bottom of the display while a image
is displayed.
–“on” (
z): to display the items.
–“off”: to not display any items.
Dimmer
To change the brightness of the display.
–“Auto” (
z): to dim the display automatically
when you turn lights on.
–“on”: to dim the display.
–“off”: to deactivate the dimmer.
Demo*
1
(Demonstration)
To set “on” (z) or “off.”
A.Scroll (Auto Scroll)
To scroll long displayed item automatically
when the disc/group/track is changed.
–“on”: to scroll.
–“off” (
z): to not scroll.
Local (Local seek mode)
–“on”: to only tune into stations with stronger
signals.
–“off” (
z): to tune normal reception.
Mono (Monaural mode)
To improve poor FM reception, select monaural
reception mode.
–“on”: to hear stereo broadcasts in monaural.
–“off” (
z): to hear stereo broadcast in stereo.
IF
–“Auto” (z): to narrow automatically the
reception frequency to eliminate noise.
–“Wide”*
2
: to always hear FM stereo
broadcasts in stereo and with full the
frequency signal reception.
EQ7 Tune (page 9)
HPF (High Pass Filter)
To select the front/rear speaker cut-off
frequency: “off,” (
z) “78Hz” or “125Hz.”
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency: “off,”
(
z) “125Hz” or “78Hz.”
Loudness
To enhance bass and treble at lower volume.
–“on”: to reinforce bass and treble.
–“off” (
z): to not reinforce bass and treble.
AUX Level
To adjust the input level for each connected
auxiliary equipment (±6 dB). This setting
negates the need to adjust the volume level
between sources.
Name Edit (page 10)
Name Delete (page 10)
BTM (page 8)
continue to next page t