Filter
Top Products
9
CDX-F5710
2-515-319-11 (1)
H:\CDX-F5710\2515319111\2515319111\251531911CDXF5710U\01US02CD-U.fm masterpage:RightH:\CDX-F5710\2515319111\2515319111\251531911CDXF5710U\01US02CD-U.fm masterpage:Right
Receiving a station through a list
— list-up
You can list up the frequency or the name. For
details on labeling a station, see page 10.
1 Select the band, then press (LIST).
The frequency or station name appears.
2 Press (GP/PRESET) +/– repeatedly until
the desired station appears.
3 Press (ENTER) to receive the station.
Other functions
Changing the sound settings
Adjusting the sound
characteristics
— BAS/TRE/BAL/FAD/SUB
You can adjust the bass, treble, balance, fader
and subwoofer volume.
1 Press (SOUND) repeatedly to select
the desired item.
The item changes as follows:
BAS (bass) t TRE (treble) t
BAL (left-right) t FAD (front-rear) t
SUB (subwoofer volume)*
* “ATT” is displayed at the lowest setting, and can
be adjusted up to 20 steps.
2 Rotate the volume control dial
repeatedly to adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Note
Adjust within 3 seconds of selecting the item.
With the card remote commander
In step 2, to adjust the selected item, press < or ,.
Adjusting the equalizer curve
— EQ7 TUNE
You can adjust and store the equalizer settings
for different tone ranges.
1 Select a source, then press (MENU).
2 Press (GP/PRESET) +/– repeatedly until
“EQ7 TUNE” appears, then press
(ENTER).
3 Press (SEEK) –/+ repeatedly to select
the desired equalizer type, then press
(ENTER).
4 Press (SEEK) –/+ repeatedly to select
the desired frequency.
The frequency changes as follows:
62 y 157 y 396 y 1K y 2.5K y
6.3K y 16K
5 Press (GP/PRESET) –/+ repeatedly to
adjust the desired volume level.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
continue to next page t