Filter
Top Products
27
Error displays/Messages
*1 When the CD/MD changer is connected to the unit,
the disc number of the CD or MD appears in the
display.
*2 The disc number of the disc causing the error
appears in the display.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
Automatic tuning is not possible.
• The local seek mode is set to “on.”
tSet the local seek mode to “off” (page
17).
• The broadcast signal is too weak.
tPerform manual tuning.
The “ST” indication flashes.
• Tune in the frequency accurately.
• The broadcast signal is too weak.
tSet to the monaural reception mode (page
17).
A program broadcast in stereo is heard in
monaural.
• The unit is in monaural reception mode.
tCancel monaural reception mode (page
17).
Interference occurs during FM reception.
The wide mode is selected.
tSet the IF mode to “IF Auto” (page 14).
Error displays
(For this unit and optional CD/MD changers)
The following indications will flash for about
5 seconds, and an alarm sound will be heard.
Blank*
1
No tracks have been recorded on an MD.*
2
tPlay an MD with recorded tracks on it.
Error*
1
• An inserted CD is dirty or inserted upside
down.*
2
tClean or insert the CD correctly.
• An inserted CD/MD cannot play because of
some problem.*
2
tInsert another CD/MD.
High Temp
The ambient temperature is more than 50°C
(122°F).
tWait until the temperature goes down
below 50°C (122°F).
NO Disc*
1
No disc is inserted in the CD/MD unit.
tInsert discs in the CD/MD unit.
NO Magazine
The disc magazine is not inserted in the CD/
MD unit.
tInsert the magazine in the CD/MD unit.
NO Music
A CD which is not a music file is inserted in
the MP3 playable CD unit.
tInsert a music CD in the MP3 playable CD
unit.
Not Ready
The lid of the MD unit is open or the MDs are
not inserted properly.
tClose the lid or insert the MDs properly.
Push Reset
The CD/MD unit cannot be operated because
of some problem.
tPress the RESET button on the unit.
continue to next page t