Filter
Top Products
27
The “ST” indication flashes.
•Tune in the frequency accurately.
•The broadcast signal is too weak.
t Set to the monaural reception mode
(page 18).
A program broadcast in stereo is heard in
monaural.
The unit is in monaural reception mode.
tCancel monaural reception mode
(page 18).
Interference occurs during FM reception.
The wide mode is selected.
tSet the IF mode to “IF AUTO” (page 18).
Error displays/Messages
Error displays
(For this unit and optional CD/MD changers)
The following indications will flash for about 5
seconds, and an alarm sound will be heard.
BLANK*
1
No tracks have been recorded on an MD.*
2
tPlay an MD with recorded tracks on it.
ERROR*
1
•A CD is dirty or inserted upside down.*
2
t Clean or insert the CD correctly.
•A CD/MD cannot play because of some
problem.*
2
t Insert another CD/MD.
HI TEMP
The ambient temperature is more than 50°C
(122°F).
tWait until the temperature goes down
below 50°C (122°F).
NO DISC
No disc is inserted in the CD/MD unit.
tInsert discs in the CD/MD unit.
NO MAG
The disc magazine is not inserted in the CD/
MD unit.
tInsert the magazine in the CD/MD unit.
NOTREADY
The lid of the MD unit is open or the MDs
are not inserted properly.
tClose the lid or insert the MDs properly.
RESET
The CD/MD unit cannot be operated
because of some problem.
tPress the RESET button on the unit.
*
1
When an error occurs during playback of an MD
or CD, the disc number of the MD or CD does
not appear in the display.
*
2
The disc number of the disc causing the error
appears in the display.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
Messages
L.SEEK +/–
The Local Seek mode is on during automatic
tuning (page 14).
“ ” or “ ”
You have reached the beginning or the end
of the disc and you cannot go any further.