Filter
Top Products
10
Creating a programme
— CD Programme Memory
You can play the tracks in the order you want
by making your own programme. You can
select up to 24 tracks for a programme. You
can store the programmes in memory.
1 During CD playback, press (SHIFT), then
press (4) (PLAY MODE) for two seconds.
2 Push the SEEK/AMS control up or down
to select the track you want.
3 Press (6) (ENTER).
4 To continue entering tracks, repeat steps
2 and 3.
5 When you finish selecting tracks, press
(4) (PLAY MODE) for two seconds.
6 Press (SHIFT).
Notes
•“*Wait*” appears in the display while the unit is
reading the data.
•“*Mem Full*” appears in the display when you
try to enter more than 24 tracks into a
programme.
µ
RLAY MODE ENTER
RLAY MODE ENTER
TRACK
RLAY MODE ENTER
TRACK
Playing a CD in various
modes
You can play CDs in various modes:
•Repeat (Repeat Play) repeats the current
track.
•Shuf (Shuffle Play) plays all the tracks in
random order.
Playing tracks repeatedly
— Repeat Play
1 During playback, press (SHIFT).
Every time you press (SHIFT), only the
items you can select light up.
2 Press (7) (REP) repeatedly until ”Repeat
1“ appears.
Repeat Play starts.
3 Press (SHIFT).
To return to normal playback mode, select
“Repeat off” in step 2 above.
Playing tracks in random order
— Shuffle Play
1 During playback, press (SHIFT).
2 Press (8) (SHUF) repeatedly until ”Shuf
1“ appears.
Shuffle Play starts.
3 Press (SHIFT).
To return to normal playback mode, select
“Shuf off” in step 2 above.
SHIFT
123456789
SET UP
REP SHUF
SHIFT
123456789
SET UP
REP SHUF