Filter
Top Products
13
OFF
Using the rotary
commander
The rotary commander works by pressing
buttons and/or rotating controls.
You can also control optional CD or MD units
with the rotary commander.
By pressing buttons (the SOURCE
and MODE buttons)
Each time you press (SOURCE), the
source changes as follows:
TUNER n CD n MD* n TV*
* If the corresponding optional equipment is
not connected, this item will not appear.
Pressing (MODE) changes the operation
in the following ways;
• Tuner: FM1 n FM2 n AM
• CD unit: CD1 n CD2 n …
• MD unit: MD1 n MD2 n …
• TV/Video: TV n Video1 n Video2
(MODE)
Press (OFF) to turn
off the unit.
Press (ATT) to
attenuate the sound.
continue to next page n
(SOURCE)
By rotating the control (the SEEK/
AMS control)
Rotate the control and release it to:
•Locate a specific track on a disc. Rotate
and hold the control until you locate the
specific point in a track, then release it to
start playback.
•Tune in stations automatically. Rotate and
hold the control to find a specific station.
By pushing in and rotating the
control (the PRESET/DISC control)
Push in and rotate the control to:
•Receive the stations memorized on the
number buttons.
•Change the disc.
Other operations
Rotate the VOL control to
adjust the volume.