Filter
Top Products
15
Actual total number: Sony CDX-C610 (E) 3-856-122-42(2)
EN
If you have labeled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P 1” above.
To select Program 2, press (4) (n)
repeatedly until “P 2” appears.
2 Select the track you want.
1 Press (SOURCE) repeatedly to select
the changer.
2 Press (SHIFT), then press the number
button to select the disc.
3 Press (SHIFT).
4 Press either side of (SEEK/AMS) to
select the track.
3 Press (5) (ENTER) momentarily.
4 To continue entering tracks, repeat steps
2 and 3.
5 When you finish entering tracks, press
(3) (PLAY MODE) for two seconds.
Notes
• “*WAIT*” appears in the display while the unit is
reading the data, or when a disc has not been put into the
unit.
• “*FULL*” appears in the display when you try to enter
more than 12 tracks into a program at one time.
Playing the stored program
Changing the disc order in the changer will not
affect program memory play.
You can select:
•PGM 1 to play Program 1.
•PGM 2 to play Program 2.
•PGM 1+2 to play Programs 1 and 2.
1 Press (SHIFT).
2 Press (3) (PLAY MODE) repeatedly until
“PGM” appears.
µ
SUR
PLAY MODE ENTER
P1
EQ
ENTER
SUR
PLAY MODE ENTER
DISC
TRACK
3
CD2
EQ
2 P102
3 Press (4) (n) repeatedly until the disired
program appears.
z PGM-1 z PGM-2 z PGM-1+2
PGM-OFF Z
Progarm Play starts.
To go back to the normal playback mode,
select “PGM-OFF” in step 3 above.
Notes
• If you press the number button during program memory
play, program memory play is interrupted, and playback
of the selected disc starts.
• “NO DATA” appears in the display if no track is stored
in the program.
• If a track stored into the program memory is not in the
disc magazine, the track will be skipped.
• When the disc magazine contains not a single track
stored into the program memory, or when the program
information has not been loaded yet, “NO READY”
appears.
Erasing the entire program
1 Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
“P 1” shows Program 1 is selected.
If you have labeled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P 1” above.
2 Press (1) (N) repeatedly until “DEL“
appears.
To erase Program 2, press (4) (n)
repeatedly until “PGM 2” appears.
3 Press (5) (ENTER) for two seconds.
The entire program is erased.
4 When you finish erasing programs, press
(3) (PLAY MODE) for two seconds.
SUR
PLAY MODE ENTER
DISC
TRACK
4
CD2
EQ
7 P108
SUR
PLAY MODE ENTER
DEL
EQ
--PGM1--
SUR
PLAY MODE ENTER
P1
EQ
NO DATA
CD/MD Changer