Filter
Top Products
13
Erasing the disc memo
1 Press (SOURCE) repeatedly to select
“CD.“
2 Press (MODE) repeatedly to select the CD
unit with the CUSTOM FILE function.
3 Press (MENU), then press either side of
(DISC/PRST) repeatedly until “NAME
DEL” appears.
4 Press (ENTER).
5 Press either side of (DISC/PRST)
repeatedly to select the disc name you
want to erase.
6 Press (ENTER) for two seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7 Press (MENU) twice.
The unit returns to normal CD play mode.
Notes
• To erase the disc memo, play a CD on the CD unit
in which the disc memo you want to erase is
stored.
• When a personalised label for a CD TEXT disc is
erased, the original CD TEXT information will
appear on the display.
Locating a disc by name
— List-up (For a CD unit with the CD TEXT
function/CUSTOM FILE function, or an MD
unit)
You can use this function for discs that have
been assigned custom names or for CD TEXT
discs.
You can locate the disc by
— its custom name: when you assign a name
for a CD or an MD using a CD unit with the
CUSTOM FILE function or an MD unit.
(For information on disc names, see
“Labelling a CD” on page 12).
— the CD TEXT information: when you play a
CD TEXT disc on a CD unit with the CD
TEXT function.
1 Press (LIST).
The name assigned to the current disc
appears in the display.
When you assign a disc memo name to a
CD TEXT disc, it takes priority over the
original CD TEXT information.
2 Press either side of (DISC/PRST)
repeatedly until you find the desired
disc.
3 Press (ENTER) to play the disc.
Notes
• When using the card remote commander, press
(LIST) to return to normal play mode. When
operating just by the unit’s button, the display
returns to normal play mode after 5 seconds.
• The track names are not displayed during MD or
CD TEXT disc playback.
• If there are no discs in the CD/MD unit, “NO
DISC” appears in the display.
• If a disc has not been assigned a custom name,
“********” appears on the display.
• Some letters cannot be displayed during MD or
CD TEXT disc playback.
• If the disc information has not been read yet by
the unit, “NOT READ” is displayed.