Filter
Top Products
21
*
1
*
1
*
2
*
2
*
3
*
3
Selecting a soundstage
menu
— Dynamic Soundstage Organizer (DSO)
If your speakers are installed into the lower
part of the doors, the sound will come from
below and may not be clear.
The DSO (Dynamic Soundstage Organizer)
function creates a more ambient sound as if
there were speakers in the dashboard (virtual
speakers).
Soundstage menu
Memory presets Meaning
DSO1 – 3 Virtual speakers (Standard)
DSO Wide Virtual speakers (Wide)
DSO off Cancel
Image of virtual speakers
*
1
Standard
*
2
Wide
*
3
Acutual speakers position (lower part of the
front doors).
Selecting the DSO
1 Press (SOURCE) to select a source (tuner,
CD, or MD).
2 Press (DSO) repeatedly to select the
desired DSO mode.
B 1 B 2 B 3 B Wide
off
bb
bb
b
To cancel the DSO mode, select “off.”
After three seconds, the display returns to
the normal playback mode.
Adjusting the balance
(BAL)
You can adjust the sound balance from the left
and right speakers.
1 Press (SOURCE) to select a source (tuner,
CD, or MD).
2 Press (SOUND) repeatedly until “BAL”
appears.
3 Press < or , to adjust the balance.
After three seconds, the display returns to
the normal playback mode.
Adjusting the front and
rear fader
1 Press (SOURCE) to select a source (tuner,
CD, or MD).
2 Press (SOUND) repeatedly to select the
“F” for the front speakers or “R” for the
rear speakers.
3 Press < or , to adjust the volume of
front/rear speakers.
After three seconds, the display returns to
the normal playback mode.