Filter
Top Products
12
EN
Actual total number: Sony CDX-4100/5100RDS (E,F,G,I) 3-810-809-11 (1)
1 Press the
PTY
button during FM
reception. n “PTY” appears on the
display.
If the currently received station is
transmitting PTY (programme type
selection) data, one of the programme type
names shown above will be displayed.
If the currently received station is not an
RDS station, or if the RDS data has not been
read, “- - - - - - - - ” will be displayed. In this
case, you can select “NEWS” or other
programme types by pressing the PTY
button.
2 Press again within five seconds.
The programme types will be displayed in
the order shown above.
3 When the desired programme type is
displayed, press either side of the AMS/
SEEK button. n “SEARCH” will blink in
the display.
The unit will search for stations
broadcasting this programme type.
4 When a programme of the desired type
is received, the programme type will
again appear in the display for five
seconds.
If the desired programme type cannot be
found, “NO DATA” will be displayed for
five seconds, and the unit returns to the
previous station (programme).
Using RDS Data for
Setting the Clock
Automatically
By receiving CT (Clock Time) data, the clock
can be set automatically.
During FM reception, press the
2
REPEAT
button while pressing the
SEL
button.
n “CT” will be displayed, and the clock
will be set.
To cancel the CT function, press these buttons
again.
Notes
• The CT function may not work even though an RDS
station is being received.
• The time set by the CT function may not be exact.
CT