Filter
Top Products
15
EN
Changing the operative direction
The operative direction of controls is factory-
set as in the illustration below.
If you need to mount the rotary commander on
the right side of the steering column, you can
reverse the operative direction.
Press (SOUND) for two seconds while
pushing the VOL control.
Rotate the VOL control to
adjust the volume.
Press (OFF) to turn
off the unit.
Press (SOUND) to adjust the
volume and sound menu.
To increase
To decrease
By rotating the control (the SEEK/
AMS control)
Rotate the control momentarily and
release it to:
•Locate a specific track on a disc. Rotate
and hold the control until you locate the
specific point in a track, then release it to
start playback.
•Tune in stations automatically. Rotate and
hold the control to tune in a specific
station.
By pushing in and rotating the
control (the PRESET/DISC control)
Push in and rotate the control to:
Receive the stations memorised on the
number buttons.
Press (DSPL) to change the
displayed items.
OFF
Press (ATT) to
attenuate
the sound.
RDS/ Other Functions
Other operations