Filter
Top Products
The Timer 21
The Timer
Tips
• To exit the standby
mode, press STANDBY
to make the t
indication disappear
from the display.
• The preset settings
remain until you reset
them.
6 Set the volume by pressing TIME SET + or –, then
DISPLAY ENTER.
7 Press STANDBY.
The t indication lights up; the player enters the
standby mode.
At the preset time, the power will go on, and the
music will play. Then the power will go off at the
preset time, and the player will enter into the
standby mode.
To check/change the waking up timer settings
Press TIMER , then DISPLAY ENTER. Each time you
press DISPLAY ENTER, a stored setting is displayed
in the set order. To change the setting, display the
setting you want to change and re-enter it.
To use the player before a timer playback starts
Just turn on the player, and then you can use it.
If you turn off the player before the preset time, timer
playback will start at the preset time.
In case of the radio, however, if you listen to the
station which is different from the one you tuned in
in step 1 on page 20, you will hear that station at the
preset time. Make sure to tune in the station you want
to listen to before you turn off the player.
To stop play
Press POWER to turn off the power.