Sony cCFD-S20CP Cassette Player User Manual


 
27
Tape Player
The tape does not move when you press
an operation button.
Close the cassette compartment securely.
The REC z button does not function or
the tape does not play or record.
Make sure the safety tab on the cassette is in
place.
The tape does not erase completely.
Clean the erasing head (see page 28).
Replace all the batteries with new ones if
they are weak.
The source which was recorded on TYPE II
(high position) or TYPE IV (metal) tape
using this unit is being played. Record on
TYPE I (normal) tape and play.
The tape does not record.
Make sure the tape is inserted properly.
Make sure the safety tab of the cassette is in
place.
The audio is weak/The audio quality is
poor.
Clean the heads, pinch roller and capstan (see
page 28).
Demagnetize the heads using a demagnetizer
(see page 28).
The sound is distorted.
The TYPE II (high position) or TYPE IV
(metal) tape is being used. Use TYPE I
(normal) tape only.
Remote
The remote does not function.
Replace all the batteries in the remote with
new ones if they are weak.
Make sure that you are pointing the remote at
the remote sensor on the player.
Remove any obstacles in the path of the
remote and the player.
Make sure the remote sensor is not exposed
to strong light such as direct sunlight or
fluorescent lamp light.
Move closer to the player when using the
remote.
After trying the above remedies, if you still have
problems, unplug the AC power cord and remove
all the batteries. After all the indications in the
display disappear, plug the AC power cord and
insert the batteries again. If the problem persists,
please consult your nearest Sony dealer.