Filter
Top Products
7
Insert the post ( or ) so that the slot on the lower post aligns
with the projection of the base (), then secure the post with the
screws ().
or
Slot
Projection
Connecting the speaker cord to the center speaker and surround
speakers
Required parts
×2×3 ×1
Center speaker:
with green colored tube
Surround speaker (R):
with gray colored tube
Surround speaker (L):
with blue colored tube
Connect the speaker cord with the colored tube to , and the speaker
cord without the colored tube to .
Rear of the speaker
Connector
Colored tube
Note
Match the color of the tube and the label on the speaker. The label is located at the rear of the
speaker.
Connecting the speaker cord to the subwoofer
Required parts
×1
Subwoofer:
with purple colored tube
×1
1
Connect the speaker cord to the subwoofer.
Colored tube
Bottom of the subwoofer
2
Thread the speaker cord through the gap along the side of the
subwoofer, and secure it in the speaker cord holder.