Sony BDV-E370 Home Theater System User Manual


 
42
US
Using an S-AIR Product
When you purchase the S-AIR product, you
need to perform the following settings to
activate wireless transmission.
About S-AIR products
There are two types of S-AIR product.
S-AIR main unit (this unit): This is for
transmitting sound. You can use up to three
S-AIR main units. (The number of usable
S-AIR main units depends on the use
environment.)
S-AIR sub unit: This is for receiving sound.
Surround amplifier (optional): You
can enjoy surround speaker sound
wirelessly.
S-AIR receiver (optional): You can
enjoy system sound in another room.
To make use of the S-AIR function, you need to
insert the wireless transmitter into the unit and
the wireless transceiver into the S-AIR sub unit.
Note
• When you insert the wireless transmitter/transceiver,
make sure that the AC power cord (mains lead) is not
connected to a wall outlet (mains).
• Do not touch the terminals of the wireless transmitter/
transceiver.
To insert the wireless transmitter
into the unit
1 Remove the screws directly below the
mark.
Note
•Remove the screws that are indicated in the
illustration. Do not remove other screws.
2 Insert the wireless transmitter.
Note
Insert the wireless transmitter with the S-AIR
logo facing up.
Insert the wireless transmitter so that the V
marks are aligned.
•Do not insert anything other than the wireless
transmitter into the EZW-T100 slot.
External Audio Device
Inserting the wireless
transmitter/transceiver
S-AIR sub unit
(surround amplifier)
S-AIR main unit
S-AIR sub unit
(S-AIR receiver)
(not supplied)
Room A
Room B
EZW-T100
EZW-T100
Rear of the unit
EZW-T100
EZW
-T100
Rear of the unit