Filter
Top Products
AUXILIARY EQUIPMENT
Listening to a cassette/MD/MP3 portable
player or other equipment
You can listen to equipment connected to the unit. Refer
to the operating instructions for the corresponding
equipment for more detailed information.
Be sure to remove inserted CDs to prevent possible
damage to the unit before connecting the equipment.
1 Connect a cassette/MD/MP3 portable player or other
equipment via the unit’s AUX IN jack (3.5 mm).
2 Press FNC repeatedly until “AUX” appears in the
display.
During AUX mode, the clock display appears.
OTHER FUNCTIONS
Changing the key illumination color
You can choose blue or red as the key illumination color.
1 Press and hold FNC until “ILL” appears in the
display.
2 Turn the Smart Jog to select 1 (for blue) or 2 (for red).
ENGLISH
6
ENGLISH
6
Smart Jog
AUX IN jack
TROUBLESHOOTING
Error code
In the following cases the corresponding error code
indication appears. Follow the suggestions below to
solve such problems. If the error code indication does
not disappear, consult an AIWA service center.
E03 Focus error. Check that the CD is loaded properly
(right side up, etc.), and the CD contains valid
data.
Reset button
If a CD does not operate properly, press the reset button
with a pointed object such as a pencil, etc. Note that all
your settings will be erased if this button is pressed.
Reset button
MAINTENANCE
Cleaning the front panel
Wipe the surface with a soft, dry cloth.
Cleaning the connector
The connector needs to be cleaned occasionally. Wipe
the surface of the connector with a cotton swab slightly
moistened with alcohol.
Back of the front panel