Filter
Top Products
masterpage:Left
lename[E:\SEM_Janet\DATA_HT-
950DP\J9041386_25497361115950DPUS\2549736111\GB06ADV_HT-5950DP-U.fm]
38
US
model name1[HT-5950DP]
model name2[HT-6900DP]
model name3[HT-9900M]
[2
-
549
-
736
-
11
(1)]
Using the CUSTOMIZE menu
to adjust the receiver
You can adjust various receiver settings using
the CUSTOMIZE menu.
1 Press MAIN MENU repeatedly to select
“ CUSTOM ”.
2 Press or repeatedly to select the
parameter you want to adjust.
For details, see “CUSTOMIZE menu
parameters” below.
3 Press + or – repeatedly to select the
setting you want.
The setting is entered automatically.
4 Repeat steps 2 and 3 to adjust the other
items.
CUSTOMIZE menu parameters
The initial settings are underlined.
x 96 XXXX
(DTS 96/24 decoding mode)
• AUTO
When a DTS 96/24 signal is input, it is played back
at 96 kHz sampling frequencies.
•OFF
Even when a DTS 96/24 signal is input, it is played
back at 48 kHz sampling frequencies.
Notes
• This parameter is valid only in the A.F.D. mode
(page 29). In other sound fields, this parameter is
always set to “96 OFF”.
• DTS 96/24 decoding is only valid in the A.F.D. mode
(page 29). When the system is set to other sound
fields, standard 48 kHz decoding is used.
x SB XXXX
(Surround back decoding mode)
You can also press SURR BACK DECODING to set
the surround back decoding mode (page 33).
For details on each decoding mode, see page 34.
•OFF
• AUTO
•ON
Note
You can select the surround back decoding mode only
when you use a sound field selected with the A.F.D.
button except for the Dolby Pro Logic IIx mode.
x A.V.SYNC. X
(Time alignment)
• Y (Yes) (Delay time: 68 ms)
The audio output is delayed so that the time gap
between the audio output and visual display is
minimized.
•N (No)
(Delay time: 0 ms)
The audio output is not delayed.
Notes
• This parameter is useful when you use a large LCD
or plasma monitor or a projection TV.
• This parameter is valid only when you use a sound
field selected with the 2CH or A.F.D. buttons.
• The parameter is not valid when PCM 96 kHz, DTS
96/24 or DTS 2048 signals are input or when the
receiver is performing DTS-ES Matrix 6.1 decoding.
x DEC. XXXX
(Digital audio input decoding priority)
Lets you specify the input mode for the digital signal
input to the DIGITAL IN jacks.
The initial setting is “DEC. AUTO” for VIDEO 2 and
“DEC. PCM” for DVD and SA-CD/CD.
• AUTO
Automatically switches the input mode between
DTS, Dolby Digital, or PCM.
•PCM
PCM signals are given priority (to prevent the
interruption when playback starts). Even when other
signals are input, the sound is output. However, this
receiver cannot decode DTS-CD when set to “DEC.
PCM”.
Note
When set to “DEC. AUTO” and the sound from the
digital audio jacks (for CD, etc.) is interrupted when
playback starts, set to “DEC. PCM”.
Advanced settings
DTS 96/24
GB01COV_HT-5950DP-U.book Page 38 Thursday, January 13, 2005 3:28 PM